2002-09-30 | Effect of casting solvent on morphology and physical properties of partially sulfonated polystyrene-block-poly(ethylene-ran-butylene)-block-polystyrene copolymers | Kim, J; Kim, B; Jung, B; Kang, YS; Ha, HY; Oh, IH; Ihn, KJ |
1998-10 | Effect of crystallinity on the electrochemical behaviour of spinel Li1.03Mn2O4 cathode materials | Sun, YK; Lee, KH; Moon, SI; Oh, IH |
2005-09 | Effect of temperature, oxidant and catalyst loading on the performance of direct formic acid fuel cell | Kim, JS; Yu, JK; Lee, HS; Kim, JY; Kim, YC; Han, JH; Oh, IH; Rhee, YW |
2002-04-01 | Effect of the catalytic ink preparation method on the performance of polymer electrolyte membrane fuel cells | Shin, SJ; Lee, JK; Ha, HY; Hong, SA; Chun, HS; Oh, IH |
2004-11-30 | Effect of the ionomers in the electrode on the performance of PEMFC under non-humidifying conditions | Ahn, SY; Lee, YC; Ha, HY; Hong, SA; Oh, IH |
1996-06 | Effect of the structural changes of the Ni-Cr anode on the molten carbonate fuel cell performance | Oh, IH; Yoon, SP; Lim, TH; Nam, SW; Hong, Seong Ahn; Lim, Hee Chun |
2004-11 | Effect of Ti substitution for Mn on the structure of LiNi0.5Mn1.5-xTixO4 and their electrochemical properties as lithium insertion material | Kim, JH; Myung, ST; Yoon, CS; Oh, IH; Sun, YK |
2006-02 | Effects of polyamidoamine dendrimers on the catalytic layers of a membrane electrode assembly in fuel cells | Lee, JH; Won, J; Oh, IH; Ha, HY; Cho, EA; Kang, YS |
2000-07 | Effects of temperature and partial pressure of CO2/O-2 on corrosion behaviour of stainless-steel in molten Li/Na carbonate salt | Lim, TH; Hwang, ER; Ha, HY; Nam, SW; Oh, IH; Hong, SA |
2004-05 | Effects of water removal on the performance degradation of PEMFCs repetitively brought to < 0 degrees C | Cho, EA; Ko, JJ; Ha, HY; Hong, SA; Lee, KY; Lim, TW; Oh, IH |
2003-03 | Electrochemical oscillations in the HCHO oxidation on a Pt electrode | Jung, I; Kim, D; Lee, J; Oh, IH; Ha, HY; Tak, Y |
1996-09-15 | Electrochemical oxidation of methanol over a silver electrode deposited on yttria-stabilized zirconia electrolyte | Hong, JK; Oh, IH; Hong, SA; Lee, WY |
2004-11-30 | Electrochemical studies of DMFC anodes with different ionomer content | Kim, JH; Ha, HY; Oh, IH; Hong, SA; Kim, HN; Lee, HI |
2000-03 | Fabrication and operational experiences of a 6kW molten carbonate fuel cell stack | Hong, SA; Lim, TH; Nam, SW; Oh, IH; Lim, HC |
2003-05-06 | Fixation of nanosized proton transport channels in membranes | Won, J; Park, HH; Kim, YJ; Choi, SW; Ha, HY; Oh, IH; Kim, HS; Kang, YS; Ihn, KJ |
2004-05-14 | Influence of cathode gas diffusion media on the performance of the PEMFCs | Prasanna, M; Ha, HY; Cho, EA; Hong, SA; Oh, IH |
2004-09-03 | Influence of the solvent in anode catalyst ink on the performance of a direct methanol fuel cell | Kim, JH; Ha, HY; Oh, IH; Hong, SA; Lee, HI |
2004-10-05 | Investigation of oxygen gain in polymer electrolyte membrane fuel cells | Prasanna, A; Ha, HY; Cho, EA; Hong, SA; Oh, IH |
1999 | LiCoO2-coated NiO cathode for MCFC | Nam, SW; Kim, SG; Oh, IH; Lim, TH; Ha, HY; Hong, SA; Kim, K; Lim, HC |
1997-06-15 | Low-temperature preparation of ultrafine LiCoO2 powders by the sol-gel method | Oh, IH; Hong, SA; Sun, YK |
2002-07-20 | Mechanical strength of porous nickel plates containing lithium and their performance as the cathode for MCFC | Kim, SG; Yoon, SP; Han, J; Nam, SW; Lim, TH; Oh, IH; Hong, SA |
2002-04-01 | Modification of polymer electrolyte membranes for DMFCs using Pd films formed by sputtering | Yoon, SR; Hwang, GH; Cho, WI; Oh, IH; Hong, SA; Ha, HY |
2004-10 | Nano-silica layered composite membranes prepared by PECVD for direct methanol fuel cells | Kim, DJ; Scibioh, MA; Kwak, S; Oh, IH; Ha, HY |
2006-04-21 | Operational characteristics of a 50 W DMFC stack | Kim, D; Lee, J; Lim, TH; Oh, IH; Ha, HY |
2000-07 | Performance analysis of NiO cathode using a molten carbonate fuel cell with gas recycle | Nam, SW; Lim, TH; Oh, IH; Ha, HY; Hong, SA; Lim, HC |
2002-04-01 | Performance and lifetime analysis of the kW-class PEMFC stack | Ahn, SY; Shin, SJ; Ha, HY; Hong, SA; Lee, YC; Lim, TW; Oh, IH |
2005-03-24 | Performance of a 1 kW-class PEMFC stack using TiN-coated 316 stainless steel bipolar plates | Cho, EA; Jeon, US; Hong, SA; Oh, IH; Kang, SG |
2002-04-01 | Performance of anode-supported solid oxide fuel cell with La0.85Sr0.15MnO3 cathode modified by sol-gel coating technique | Yoon, SP; Han, J; Nam, SW; Lim, TH; Oh, IH; Hong, SA; Yoo, YS; Lim, HC |
2002-04-01 | Performance of LiCoO2-coated NiO cathode under pressurized conditions | Han, J; Kim, SG; Yoon, SP; Nam, SW; Lim, TH; Oh, IH; Hong, SA; Lim, HC |
2002-06-15 | Preparation and characterization of plasma treated PP composite electrolyte membranes | Bae, B; Chun, BH; Ha, HY; Oh, IH; Kim, D |