| 2019-06 | Heterogeneous morphology of PAN fibers by cyclization and oxidation | Choi jiwon; Jang Dawon; Yong-Sik Chung; Lee Sung Ho |
| - | High temperature mechanical properties of Ti-, Zr- and Ni-based amorphous ribbons | Subramanian Jayalakshmi; Eric Fleury |
| - | High-strength and modulus carbon nanotube fibers | 박옥경; Bon-Cheol Ku |
| - | High-strength carbon nanotube fibers for multifunctional composites | Bon-Cheol Ku |
| 2019-07 | Highly strong and conductive carbon nanotube fibers | Bon-Cheol Ku; LEE DONGJU; Ok Chang Min; 홍성재; Seong-woo Ryu |
| 2010-03 | Hydrogen Embrittlement in Metallic Amorphous Alloys: An Overview | Subramanian Jayalakshmi; 에릭플러리 |
| 2008-04 | Hydrogenation of Ti50Zr25Co25 amorphous ribbons and its effect on their structural and mechanical properties | Jayalakshmi, S.; Fleury, E.; Lee, D. Y.; Chang, H. J.; Kim, D. H. |
| 2015-05 | In vitro dynamic degradation behavior of new magnesium alloy for orthopedic applications | Yang, Gui-Fu; Kim, Yu-Chan; Han, Hyung-Seop; Lee, Gwang-Chul; Seok, Hyun-Kwang; Lee, Jae-Chul |
| 2024-01 | Influence of bio-resource-derived graphene oxide on the mechanical and thermal properties of poly(vinyl alcohol) nanocomposites | Arya, Tanuja; Bohra, Bhashkar Singh; 체트나 테와리; Dhali, Sunil; Dikshit, Vishwesh; Rana, Sravendra; 정용채; Sahoo, Nanda Gopal |
| 2017-01 | Influence of Nb on Microstructure and Mechanical Properties of Ti-Sn Ultrafine Eutectic Alloy | Kim, Young Seok; Park, Hae Jin; Kim, Jeong Tae; Hong, Sung Hwan; Park, Gyu Hyeon; Park, Jin Man; Suh, Jin Yoo; Kim, Ki Buem |
| 1992-01 | Influence of small Mn addition on thermal deformation and mechanical properties in Fe-36.5% Ni invar alloy | 이종현; 김희중; 강일구; 김학신 |
| 1997-01 | Influence of tension during oxidative stabilization on SO2 adsorption characteristics of polyacrylonitrile (PAN) based activated carbon fibers | Lee, JK; Shim, HJ; Lim, JC; Choi, GJ; Kim, YD; Min, BG; Park, D |
| 2013-11 | Layered nanofiller-reinforced polyketone composites | Lee, Juchul; Lee, Kwang Hoon; Kim, Daehum; Lim, Soonho; Lee, Sang-Soo |
| - | Mechanical and electrical properties of carbon nanotube-grafted polyimide nanocomposites | YOU NAM HO; Lim Jun; Bon-Cheol Ku; Goh Munju; Shin Dong Geun; Hyeonuk Yeo; Cheol-Min Yang; Dong Su Lee; Hwang, Junyeon |
| 2012-11 | Mechanical Properties and Fabrication of Nanostructured Al2TiO5 Compound by Pulsed Current Activated Sintering | Kang, Hyun-Su; Park, Hyun-Kuk; Doh, Jung-Mann; Yoon, Jin-Kook; Park, Bang-Ju; Shon, In-Jin |
| 2011-08 | Mechanical Properties and Fabrication of Nanostructured Mg2SiO4-MgAl2O4 Composites by High-Frequency Induction Heated Combustion | Shon, In-Jin; Kang, Hyun-Su; Hong, Kyung-Tae; Doh, Jung-Mann; Yoon, Jin-Kook |
| 2015-07 | Mechanical Properties and Rapid Low-temperature Consolidation of Nanocrystalline Cu-ZrO2 Composites by Pulsed Current Activated Heating | Kang, Bo-Ram; Yoon, Jin-kook; Hong, Kyung-Tae; Shon, In-Jin |
| - | Mechanical Properties of Graphene Oxide Wrapped Carbon Nanotube Fibers | Choo Hun Go; Park Ok-kyung; Youngjin Jeong; Hwan Chul Kim; Bon-Cheol Ku |
| - | Mechanical Properties of Polymer Cross-linked Carbon Nanotube fibers | Ok-Kyung Park; Hwang, Junyeon; YOU NAM HO; Youngjin Jeong; Bon-Cheol Ku |
| 2010-04 | Mechanical properties of SiC ceramics sintered with RE2O3 (RE: Sc, Lu, Y) and AlN additives | Kumar, B. V. Manoj; Roh, Myong-Hoon; Kim, Young-Wook; Kim, Wonjoong; Park, Sang-Whan |
| 1987-03 | Mechanical properties of sintered and HIPed silicon nitride. | 김창삼; 하정수; 이준근 |
| 2005-03 | Mechanical properties of synthesized Ti3SiC2 by hot pressing from TiCx/Si powder mixture | Hwang, SS; Park, SW; Kim, TW |
| 1999-11 | Mechanical properties of tape-cast alumina-glass dental composites | Kim, DJ; Lee, MH; Kim, CE |
| 2000-08 | Mechanical properties, phase stability, and biocompatibility of (Y,Nb)-TZP/Al2O3 composite abutments for dental implant | Kim, DJ; Lee, MH; Lee, DY; Han, JS |
| 2004-08 | Mechanical property optimisation of materials by nanostructuring: reduction of residual compressive stress in ta-C film | Lee, CS; Lee, KR; Suh, SH |
| 2011-06 | Mechanical synthesis and rapid consolidation of nanocrystalline 3Fe(0.67)Cr(0.33)-Al2O3 composite by high frequency induction heating | Shon, In-Jin; Kim, Sung-Yong; Ko, In-Yong; Doh, Jung-Mann; Yoon, Jin-Kook; Park, Na-Ra |
| 2013-08 | Mechanically Robust, Electrically Conductive Biocomposite Films Using Antimicrobial Chitosan-Functionalized Graphenes | Yadav, Santosh Kumar; Jung, Yong Chae; Kim, Jin Hee; Ko, Yong-Il; Ryu, Hee Jeong; Yadav, Mukesh Kumar; Kim, Yoong Ahm; Cho, Jae Whan |
| 2002-04 | Microstructural control and characterization of CuAlNi-based SMA fabricated by continuous casting process | Jang, WY; Lee, SH; Jee, KK; Jeong, SH; Kim, KS; Lee, EG |
| 1994-10 | Microstructures and mechanical properties of squeeze cast Al-Si-Cu-Mg alloy | 이정일; 한요섭; 이호인; 김문일 |
| 2017-09 | On the enhancement of thermo-mechanical properties of poly(L-lactide) by solid-state extrusion for biodegradable spinal fixation devices | Kim, Chang Yong; Jung, Youngmee; Lim, Soonho; Kim, Soo Hyun |
