2017-09 | On the enhancement of thermo-mechanical properties of poly(L-lactide) by solid-state extrusion for biodegradable spinal fixation devices | Kim, Chang Yong; Jung, Youngmee; Lim, Soonho; Kim, Soo Hyun |
2006-05 | One step synthesis and densification of ultra-fine WC by high-frequency induction combustion | Kim, HC; Shon, IJ; Yoon, JK; Lee, SK; Munir, ZA |
2022-09 | Optimization of the clinically approved Mg-Zn alloy system through the addition of Ca | Roh, Hyung-Jin; Park, Jaeho; Lee, Sun-Hee; Kim, Do-Hyang; Lee, Gwang-Chul; Jeon, Hojeong; Chae, Minseong; Lee, Kang-Sik; Sun, Jeong-Yun; Lee, Dong-Ho; Han, Hyung-Seop; Kim, Yu-Chan |
2023-10 | Optimizing strength-corrosion properties in sulfuric acid environment via tailoring V-Cr composition in medium-entropy VCrCoNi alloys | Chung, Hyun; Lim, Gukhyun; Nam, Seungjin; Cho, Hoon-Hwe; Hong, Jihyun; Sohn, Seok Su |
2014-01 | Orientation dependence of the fracture behavior of graphene | Jhon, Young I.; Jhon, Young Min; Yeom, Geun Y.; Jhon, Myung S. |
2007-11 | Origin of the plasticity in bulk amorphous alloys | Lee, Jae-Chul; Park, Kyoung-Won; Kim, Kyou-Hyun; Fleury, Eric; Lee, Byeong-Joo; Wakeda, Masato; Shibutani, Yoji |
2022-01 | Outstanding Strengthening and Toughening Behavior of 3D-Printed Fiber-Reinforced Composites Designed by Biomimetic Interfacial Heterogeneity | Yu, Siwon; Hwang, Yun Hyung; Lee, Kang Taek; Kim, Sang Ouk; Hwang, Jun Yeon; Hong, Soon Hyung |
2015-08-25 | Oxidation behavior of amorphous boron carbide-silicon carbide nano-multilayer thin films | Bae, K. -E.; Chae, K. -W.; Park, J. -K.; Lee, W. -S.; Baik, Y-J |
2002-09 | Oxidation behavior of liquid-phase sintered silicon carbide with aluminum nitride and rare-earth oxides (Re2O3 where Re=Y, Er, Yb) | Choi, HJ; Lee, JG; Kim, YW |
2007-02 | Oxidation of Ti3SiC2 between 900 and 1200 degrees C in air | Lee, D. B.; Park, S. W. |
2022-10 | Perpendicularly stacked array of PTFE nanofibers as a reinforcement for highly durable composite membrane in proton exchange membrane fuel cells | Hwang, Chang-Kyu; Lee, Kyung Ah; Lee, Jiyoung; Kim, Youngoh; Ahn, Hyunchul; Hwang, Wontae; Ju, Byeong-Kwon; Kim, Jin Young; Yeo, Sang Young; Choi, Joonmyung; Sung, Yung-Eun; Kim, Il-Doo; Yoon, Ki Ro |
2024-05 | Phase stability and initial phase high-temperature corrosion behavior of non-stoichiometric lanthanum cerium oxide thermal barrier coatings | Kandasamy, Praveen; Kandala, Bhavani; Lee, Min Wook; Sivakumar, Govindarajan |
1999-05 | Phase stability of (Y,NB)-TZP/Al2O3 composites under low temperature hydrothermal conditions | Lee, DY; Kim, DJ; Jang, JW; Choi, DW; Lee, SJ |
2009-12 | Physical properties of nanocomposites prepared by in situ polymerization of high-density polyethylene on multiwalled carbon nanotubes | Kim, Jihun; Hong, Soon Man; Kwak, Soonjong; Seo, Yongsok |
2007-09 | Plain-strain bulge test for nanocrystalline copper thin films | Wei, Xiaoding; Lee, Dongyun; Shim, Sanghoon; Chen, Xi; Kysar, Jeffrey W. |
2009-08 | Plasticity of amorphous alloys assessed by their homogeneous flow rate | Park, Kyoung-Won; Lee, Chang-Myeon; Fleury, Eric; Lee, Jae-Chul |
2009-11 | Plasticity of Amorphous Alloys: 1. Homogeneous Deformation | Park, Kyoung-Won; Lee, Chang-Myeon; Lee, Jae-Chul |
2009-11 | Plasticity of Amorphous Alloys: 2. Inhomogeneous Deformation | Park, Kyoung-Won; Lee, Chang-Myeon; Lee, Jae-Chul |
2021-11-15 | Poly(2,6-dimethyl-1,4-phenylene ether)/poly(phenylene sulfide)/styrenic block copolymer blends compatibilized with reactive polystyrene | Kim, Do Kyun; Hwang, Seung Sang; Yu, Seunggun |
2016-12 | Poly(L-lactic acid) scaffold with oriented micro-valley surface and superior properties fabricated by solid-state drawing for blood-contact biomaterials | Im, Seung Hyuk; Jung, Youngmee; Jang, Yangsoo; Kim, Soo Hyun |
2016-02-10 | Poly(vinyl alcohol) nanocomposites containing reduced graphene oxide coated with tannic acid for humidity sensor | Lim, Min-Young; Shin, Huiseob; Shin, Dong Myung; Lee, Sang-Soo; Lee, Jong-Chan |
2002-01-31 | Polyethylene/clay nanocomposite by in-situ exfoliation of montmorillonite during Ziegler-Natta polymerization of ethylene | Jin, YH; Park, HJ; Im, SS; Kwak, SY; Kwak, S |
2019-04 | Post-assembly modification of polymeric composite membranes using spin drying for fuel cell applications | Lee, Kyung Ah; Yoon, Ki Ro; Kwon, Sung Hyun; Lee, Kyung Jin; Jo, Sunhee; Lee, Ju Sung; Lee, Kwan-Young; Lee, Seung Woo; Lee, Seung Geol; Kim, Jin Young |
2021-04 | Predictive integrated numerical approach for modeling spatio-temporal microstructure evolutions and grain size dependent phase transformations in steels | Chen, Shuai-Feng; Bandyopadhyay, Kaushik; Basak, Shamik; Hwang, Byoungchul; Shim, Jae-Hyeok; Lee, Joonho; Lee, Myoung-Gyu |
2022-03 | Preparation and characterization of carbon fiber reinforced plastics (CFRPs) incorporating through-plane-stitched carbon fibers | Hong, H.; Bae, K.J.; Jung, H.; Oh, Y.; You, N.-H.; Lee, J.-C.; Yu, J. |
1998-10 | Preparation and characterization of syndiotacticity-rich ultra-high molecular weight poly(vinyl alcohol) imogolite blend film | Choi, JH; Cho, YW; Ha, WS; Lyoo, WS; Lee, CJ; Ji, BC; Han, SS; Yoon, WS |
2022-10 | Preparation of Al/AlN composites by in-situ reaction in the nitridation-induced self-forming process | Kim, Jungjoon; Park, Jooyoung; Shim, Cheol-Hwee; Ahn, Jae-Pyong; Choi, Hyunjoo; Lee, Kon-Bae |
2021-01-14 | Preparation of crosslinker-free anion exchange membranes with excellent physicochemical and electrochemical properties based on crosslinked PPO-SEBS | Sung, Seounghwa; Chae, Ji Eon; Min, Kyungwhan; Kim, Hyoung-Juhn; Nam, Sang Yong; Kim, Tae-Hyun |
2006-06-16 | Preparation of new bioactive hybrid bone cements containing Bis-GMA derivatives as a prepolymer | Park, Bang-Ju; Park, Kwideok; Ahn, Kwang-Duk; Chin, Yong-Ok; Han, Dong Keun |
2011-10 | Processing and Characterization of Carbon Nanotube Mat/Epoxy Composites | Kim, H. S. |