- | Effect of alkali on the poisoning over the catalyst Ni/MgO in the molten carbonate fuel cell of direct internal reforming type | 문형대; Ha Heung Yong; Lim Tae Hoon; Hong Seong Ahn; 이호인 |
1995-01 | Effect of hot rolling on the Young's modulus of (Al//2O//3)//p/6061-Al composite. | 이재철; 한요섭; 이호인 |
- | Effect of injection conditions and preform properties on the melt infiltration of aluminium matrix composite engine block | Han, Yo Sub; 이호인 |
- | Effect of oxidation state of Ni precursor on steam reforming reaction over Ni/MgO catalysts for DIR-MCFC | 문형대; Lim Tae Hoon; 이호인 |
1994-06 | Effect of pressure on interfacial heat transfer coefficient in the squeeze casting process. | 김진수; 안재영; 한요섭; 이호인; 홍준표 |
- | Effect of pressure on microsegregation of Al-4.5%Cu alloy | Kim Hyung Don; 윤의박; 이호인; Han Yo Sub |
1997-01 | Effect of processing temperatures on interfacial reactions in SiCp/2024 Al composites | 이재철; 변지영; 석현광; 오창석; 이호인 |
- | Effect of the porous Ni barrier on the transfer on alkali to the catalyst in the molten carbonate fuel cell of direct internal reforming type | 문형대; Ha Heung Yong; Lim Tae Hoon; Hong Seong Ahn; 이호인 |
1996-01 | Effect of the processing methods on the formation of Al4C3 in SiCp/2024 Al composites | LEE JAE CHUL; 이호인; Seok Hyun Kwang; PARK SUNG-BAE |
1996-01 | Effects of fluid flow on the solute redistribution of high purity aluminum ingot | 김기배; 김경민; 이재철; 이호인; 윤의박; 조남돈 |
- | Effects of fluid flow on the solute redistribution of high purity aluminum ingot. | Kim Ki Bae; LEE JAE CHUL; 이호인; 김경민; 윤의박; 조남돈 |
1972-01 | Effects of forge-quenching treatment on the mechanical properties of medium carbon steel | 이호인; 장경택 |
- | Effects of noble metal promoters on the activity of catalyst for internal steam reforming in molten carbonate fuel cell (MCFC) | 정창렬; 문형대; Ha Heung Yong; Lim Tae Hoon; Hong Seong Ahn; 이호인 |
- | Effects of solvent for anode cataltyst ink on the performance of DMFC | 김준희; Ha Heung Yong; Oh In Hwan; Hong Seong Ahn; Hyuk-Nyun Kim; 이호인 |
- | Effects of the electromagnectic stirring on the microstructure of thixotropic al alloys. | 이덕영; Kim Ki Bae; 이호인; 서승일; 김도향 |
2001-07 | Effects of the injection speed and the gate geometry on the flow behaviors of the molten metal | 이재철; 임창동; 석현광; 이호인 |
- | Electrochemical analysis of DMFC anodes with different ionomer content | 김준희; Ha Heung Yong; Oh In Hwan; Hong Seong Ahn; 김혁년; 이호인 |
- | ethodlogies to characterize the interfacial reaction products in Al alloy composites | LEE JAE CHUL; 이호인 |
- | Experimental investigation of natural convection during upward and downward vertical bridgman growth of off-eutectic Al-Cu alloys. | Kim Ki Bae; 윤의박; 이호인; 김봉완; 허보영 |
1995-03 | Fabrication and mechanical properties of SiCw reinforced 2124Al matrix composites. | 전정식; 이호인; 유연철 |
- | Fabrication of Al alloy billet by horizontal continuous casting machine utilizing an electromagnetic stirrer | Kim Ki Bae; 이덕영; SEON YONG - KYU; 이호인; 신돈수 |
- | Fabrication of metal matrix composites by gas foaming process | Han Yo Sub; 이호인 |
- | Fabrication of multi-layer metal matrix composites by squeeze casting process | Han Yo Sub; 이호인 |
1999-08 | Fabrication of the wear resistant Al-25Si-X alloy via spray forming and feasibility tests for a cylinder liner application | 석현광; 이재철; 신돈수; 이호인 |
1999-11 | Flow behavior of the pseudoplastic fluid | 이재철; 홍기원; 고영진; 이호인 |
2001-03 | Fracture mechanism of the Al-25Si-X composite fabricated via spray forming and extrusion 1 - experimental investigation. | 석현광; 박우진; 이호인; 이재철 |
2001-03 | Fracture mechanism of the Al-25Si-X composite fabricated via spray forming and extrusion 2 - numerical analysis. | 석현광; 서진구; 이호인; 이재철 |
2002-02 | G7 과제를 통한 자동차용 경량 소재 및 부품 개발 | 석현광; 이호인; 신돈수 |
2000-12 | Heat treatment of vaccum die castings | 한요섭; 이호인 |
- | High Water Contents on Direct Ethanol Molten Carbonate Fuel Cell | Devianto Hary; Li Zhen lan; Yoon, Sung Pil; Han, Jonghee; Nam, Suk-Woo; Lim, Tae Hoon; 이호인 |