2001-11 | Effect of continuous confined strip shearing on texture of strip cast 1050 Al alloy sheet | 한준현; 오규환; 석현광; 정영훈; 이재철 |
1997-01 | Effect of processing temperatures on interfacial reactions in SiCp/2024 Al composites | 이재철; 변지영; 석현광; 오창석; 이호인 |
2001-07 | Effects of the injection speed and the gate geometry on the flow behaviors of the molten metal | 이재철; 임창동; 석현광; 이호인 |
2003-08 | Electrochemical characteristics of ECAPed 1050 Al alloy. | 정민경; 최윤석; 김정구; Young-Man Kim; 이재철; 석현광 |
1999-08 | Fabrication of the wear resistant Al-25Si-X alloy via spray forming and feasibility tests for a cylinder liner application | 석현광; 이재철; 신돈수; 이호인 |
2016-08-22 | Fe-Si 합금 분말의 제조방법 | 변지영; 김윤배; 석현광; 김도형; 하헌필; 현도빈; 김장원 |
2013-12-31 | Fe-Si 합금 분말의 제조방법 | 변지영; 김윤배; 석현광; 김도형; 하헌필; 현도빈; 김장원 |
2001-03 | Fracture mechanism of the Al-25Si-X composite fabricated via spray forming and extrusion 1 - experimental investigation. | 석현광; 박우진; 이호인; 이재철 |
2001-03 | Fracture mechanism of the Al-25Si-X composite fabricated via spray forming and extrusion 2 - numerical analysis. | 석현광; 서진구; 이호인; 이재철 |
2002-02 | G7 과제를 통한 자동차용 경량 소재 및 부품 개발 | 석현광; 이호인; 신돈수 |
2015-08 | Improvement of coating adhesion ability on magnesium by femtosecond laser surface modification | 박재호; 한형섭; 이선희; 박지민; 김유찬; 옥명렬; 석현광; 정석; 이지욱; 전호정 |
2000-02 | Interfacial phenomena in the SiC/2014Al composite : tailoring the interfaces | 이재철; 안재평; 심재혁; 석현광; 이호인 |
2023-06-06 | M1 대식세포로의 선택적 분화방법 | 전호정; 서영민; 서현선; 오승자; 김유찬; 석현광; 옥명렬 |
2021-03-25 | M1 대식세포로의 선택적 분화방법 | 전호정; 서영민; 서현선; 오승자; 김유찬; 석현광; 옥명렬 |
2000-11 | Macroscopic heat transfer model in electric arc spray forming of low carbon steel ring | 석현광; 이재철; P.S. Grant; 이호인 |
2009-12 | Manufacturing and Properties of Carbon Nanotube-Aluminum Nanocomposite | 한준현; 석현광; 지광구 |
2000-11 | Material properties of the short fiber reinforced Al alloy composite II : Effect of the interfacial reaction | 석현광; 하용식; 이호인; 이재철 |
1998-10 | Microstructural evolutions in hypereutectic Al-Si alloy during spray forming and extrusion | 김상균; 석현광; 이재철; 이호인; 신돈수; 나형용 |
1998-01 | Numerical analysis on temperature profile of spray formed rod by B. F. C | 석현광; 여동훈; 오규환; 윤종규; 나형용; 이호인 |
1997-01 | Numerical analysis on the characteristics of convergence to steady state in spray forming of rod (I) - Steady state of forming process in 3-d model | 석현광; 오규환; 이호인; 나형용 |
1997-01 | Numerical analysis on the characteristics of convergence to steady state in spray forming of rod (II) - The characteristics of convergence to steady state at various process parameters | 석현광; 오규환; 이호인; 나형용 |
1998-06 | Optimization of initial process parameter in spray forming (I) : control of the initial melt temperature | 이재철; 석현광; 신돈수; 이호인 |
2015-10 | Overview of long term clinical study performed in Korea | 한형섭; 김유찬; 석현광 |
1996-01 | Phase identification of the interfacial reaction product of SiC//p/Al composite using convergent beam electron diffraction technique. | 이정일; 이재철; 석현광; 이호인 |
2005-07 | Processing of Metallic Materials by Gas Atomized Spray Forming | 백경호; 석현광 |
2022-05 | R&D 가치평가를 위한 다면적 접근: KIST 방역 R&D 사례를 중심으로 | 임혜진; 김찬수; 석현광; 조한얼 |
2001-03 | Straining hardening of the Al alloy sheet during cold rolling and equal channel angular pressing | 이재철; 석현광; 정영훈; 이호인 |
2005-01 | Synthesis of ceramic protective coatings for chemical plant parts operated in hi-temperature and corrosive/erosive environment | 손명찬; 박정래; 홍경태; 석현광 |
2015-09-03 | T7 박테리오파지를 이용한 표적-특이적 프로브 및 이를 이용한 바이오마커의 탐지 | 이관희; 최종훈; 황민태; 송장원; 석현광; 이종욱 |
2015-08 | Tailored Mg-Zn-Ca alloy for biomedical application | 노형진; 한형섭; 이지욱; 석현광; 김도향; 김유찬 |