2016-06 | 3D Inspection by Registration of CT and Dual X-ray Images | 이득희; 김영준; 김원태 |
2004-07 | A development of Ti-based bulk metallic glass | 김유찬; 김원태; 김도향 |
1997-01 | A study on the application of heat pipe to the cooling of ATM switching system | 김원태; 이윤표; 윤성영 |
1992-11 | A study on the microstructure of spray formed Al-Fe alloys | 오규환; 김원태; 이호인 |
2013-04 | Al-Ni-Co-Y계 비정질 합금의 점도 및 열적 안정성 연구 | 나민영; 임가람; 박성현, et al |
2004-07 | Amorphous and icosahedral phases in Ti-Zr-Cu-Ni-Be alloys | 김유찬; 박진만; 이진규, et al |
2012-06 | Calibration Method for Microscale Stereo X-ray Imaging System | 김영준; 김원태; 박세형, et al |
2009-05 | Carrier transport in flexible organic bistable devices of ZnO nanoparticles embedded in an insulating poly(methyl methacrylate) polymer layer | 손동익; 박동희; 최원국, et al |
2002-08 | Comparative study of the tribological behavior of thermal sprayed quasicrystalline coating layers | Eric Fleury; 김유찬; Jae-Soo Kim, et al |
1996-01 | Deformation modes of the superplastic Al-10wt%Ti alloy at high strain-rates. | 금동화; 서상희; 김혜성, et al |
1996-01 | Effect of a thin wire insert on the bubble rise in a miniature two-phase closed thermosyphon. | 김원태; 이윤표 |
2001-02 | Effect of silver addition on formation of secondary phases in squeeze cast Al-Cu-Mg alloys | 김유찬; 김도향; 김원태, et al |
2004-08 | Effect of Yttrium Addition on Thermal Stability and Glass Forming Ability in Fe-TM (Mn, Mo, Ni)-B Ternary Alloys | 김지훈; 박준식; 에릭플러리, et al |
2002-10 | Effects of thermal spraying methods and temperature on the friction and wear behavior of the Al-Ni-Co-Si quasicrystalline coating layers | Jae Soo Kim; 김유찬; Eric Fleury, et al |
2008-12 | Electrochemical Characterization of Tin Oxide Prepared by Microwave Heating | 김원태; 이의경; 조병원, et al |
2008-11 | Enhancement of plasticity in Ti-rich Ti-Zr-Be-Cu-Ni-Ta bulk glassy alloy via introducing the structural inhomogeneity | 박진만; 김도향; 김기범, et al |
2015-10 | Formation of nanoporous amorphous GeOx by de-alloying phase separated Al60Ge30Mn10 amorphous alloy | 김강철; SH Park; 나민영, et al |
2004-03 | Formation of quasicrystalline phases in Al-rich Al-Mn-Be alloys | 장혜정; 에릭플러리; G.S. Song, et al |
2002-05 | Glass forming ability and crystallization behavior in amorphous Ti//5//0Cu//3//2//-//xNi//1//5Sn//3Be//x(x=0,1,3,7) alloys. | 김유찬; 김원태; 김도향 |
2003-09 | Glass forming ability and crystallization behavior of Ti-based amorphous alloys with high specific strength | 김유찬; 배동현; 김원태, et al |
2001-08 | Glass forming ability and crystallization behaviors of the Ti-Cu-Ni-(Sn) alloys with large supercooled liquid region | 김유찬; 이승훈; 김원태, et al |
2004-04 | Glass Forming Ability and Mechanical properties of Misch Metal-Based Bulk Metallic Glass Matrix Composite | 김지훈; 이주연; 박진만, et al |
1995-01 | High strain-rate superplasticity of an in-situ Al//3Ti//f/Al composite processed through powder metallurgy. | 금동화; 김혜성; 김원태, et al |
2011-04 | Microstructure analysis of metallic glasses | 장혜정; 박은수; 김원태, et al |
1998-01 | Microstructure and magnetic properties of melt-spun (Tb//0//.//3//3Fe//0//.//6//7)//1//-// χ B// χ alloys | 김원태; 유성초; 임상호 |
2004-07 | Microstructure modification and quasicrystalline phase formation in Al-Mn-Si-Be cast alloys | 장혜정; 에릭플러리; G.S. Song, et al |
1993-01 | Microstructures and thermal stability of hyper-peritectic Al-Ti alloys processed by the splat quenching technique. | 금동화; 김혜성; 김원태 |
2006-12 | Nanometer-sized porous Ti-based metallic glass | 자야마니; 박병주; 김도향, et al |
2008-02 | Poisson's ratio and fragility of bulk metallic glasses | 나종현; 박은수; 김유찬, et al |
2004-05 | Precipitation of a two-dimensional aperiodic approximant phase in Al-rich Al-Mn-Be alloy | 장혜정; 에릭플러리; Y.H. Lee, et al |