| 2005-05-26 | A novel route to produce 4-t-butyltoluene by t-butylation of toluene with t-butylalcohol over mesoporous Al-MCM-41 molecular sieves | Selvaraj, M; Jeon, SH; Han, J; Sinha, PK; Lee, TG |
| 2002-10-24 | A stabilized NiO cathode prepared by sol-impregnation of LiCoO2 precursors for molten carbonate fuel cells | Kim, SG; Yoon, SP; Han, J; Nam, SW; Lim, TH; Hong, SA; Lim, HC |
| 2004-08-15 | A study on the chemical stability and electrode performance of modified NiO cathodes for molten carbonate fuel cells | Kim, SG; Yoon, SP; Han, J; Nam, SW; Lim, TH; Oh, IH; Hong, SA |
| 2004-03-25 | Development of Au/CeO2 catalysts for preferential oxidation of CO in PEMFC | Shin, WS; Jung, CR; Han, J; Nam, SW; Lim, TH; Hong, SA; Lee, HI |
| 2005-01-10 | Development of nanophase CeO2-Pt/C cathode catalyst for direct methanol fuel cell | Yu, HB; Kim, JH; Lee, HI; Scibioh, MA; Lee, J; Han, J; Yoon, SP; Ha, HY |
| 2004-10-05 | Dissolution behavior of Co-coated NiO cathode in molten (Li0.62K0.38)(2)CO3 eutectics | Ryu, BH; Han, J; Yoon, SP; Nam, SW; Lim, TH; Hong, SA; Kim, KB |
| 2004-01 | Effect of electrode microstructure on gas-phase diffusion in solid oxide fuel cells | Yoon, SP; Nam, SW; Han, J; Lim, TH; Hong, SA; Hyun, SH |
| 2005-01 | Fabrication of an anode-supported SOFC with a sol-gel coating method for a mixed-gas fuel cell | Vo, NXP; Yoon, SP; Nam, SW; Han, J; Lim, TH; Hong, SA |
| 2001 | Improved performance of La0.85Sr0.15MnO3 cathodes by sol-gel coatings | Yoon, SP; Nam, SW; Lim, TH; Han, J; Hong, SA |
| 2004-09-10 | Improvement of anode performance by surface modification for solid oxide fuel cell running on hydrocarbon fuel | Yoon, SP; Han, J; Nam, SW; Lim, TH; Hong, SA |
| 2004-11-15 | In situ oxidation/lithiation of Ni-Co alloy in the molten Li-0.62/K-0.38 carbonates eutectics | Ryu, BH; Yoon, SP; Han, J; Nam, SW; Lim, TH; Hong, SA; Kim, KB |
| 2002-07-20 | Mechanical strength of porous nickel plates containing lithium and their performance as the cathode for MCFC | Kim, SG; Yoon, SP; Han, J; Nam, SW; Lim, TH; Oh, IH; Hong, SA |
| 2005-07-15 | Microstructure and magnetoresistance of sputtered bismuth thin films upon annealing | Chang, J; Kim, H; Han, J; Jeon, MH; Lee, WY |
| 2001-05-15 | Palladium membrane reactor for the dehydrogenation of ethylbenzene to styrene | She, Y; Han, J; Ma, YH |
| 2002-04-01 | Performance of anode-supported solid oxide fuel cell with La0.85Sr0.15MnO3 cathode modified by sol-gel coating technique | Yoon, SP; Han, J; Nam, SW; Lim, TH; Oh, IH; Hong, SA; Yoo, YS; Lim, HC |
| 2000-02-01 | Performance of Fabry-Perot microcavity structures with corrugated diaphragms | Han, J; Kim, J; Kim, TS; Kim, JS |
| 2002-04-01 | Performance of LiCoO2-coated NiO cathode under pressurized conditions | Han, J; Kim, SG; Yoon, SP; Nam, SW; Lim, TH; Oh, IH; Hong, SA; Lim, HC |
| 2004-09-01 | Selective oxidation of CO over CuO-CeO2 catalyst: effect of calcination temperature | Jung, CR; Han, J; Nam, SW; Lim, TH; Hong, SA; Lee, HI |
| 2004-04-15 | Sol-gel processing of yttria-stabilized zirconia films derived from the zirconium n-butoxide-acetic acid-nitric acid-water-isopropanol system | Kim, SG; Nam, SW; Yoon, SP; Hyun, SH; Han, J; Lim, TH; Hong, SA |
| 2005-03 | t-butylation of 1,2-dihydroxybenzene over mesoporous solid acid catalysts | Selvaraj, M; Him, BH; Han, J; Lee, TG |
