2020-11-10 | A composite RAS with an enhanced uniformity of absorbing performance using a MWCNT-anchored aramid fiber | Cheon, Jinsil; Lim, Sung Jun; Kim, Minkook |
2017-08 | A cost-effective route to produce Al/AlN composites with low coefficient of thermal expansion | Lee, Kon-Bae; Yoo, Seong-Hyeon; Kim, Yong-Hwan; Han, Chul-Woong; Won, Sung-Ok; Ahn, Jae-Pyung; Choi, Hyun-Joo |
2004-07-15 | A development of Ti-based bulk metallic glass | Kim, YC; Kim, WT; Kim, DH |
2015-11 | A facile route to enhance the water flux of a thin-film composite reverse osmosis membrane: incorporating thickness-controlled graphene oxide into a highly porous support layer | Lee, Jaewoo; Jang, Jun Hee; Chae, Hee-Ro; Lee, Sang H.; Lee, Chung-Hak; Park, Pyung-Kyu; Won, Young-June; Kim, In-Chul |
1999-01 | A new route to the fabrication of Si3N4/SiC nanocomposite | Kim, CS; Oh, YS; Cho, WS; Lim, DS; Cheong, DS |
2005-11 | A poly(lactic acid)/calcium metaphosphate composite for bone tissue engineering | Jung, Y; Kim, SS; Kim, YH; Kim, SH; Kim, BS; Kim, S; Choi, CY; Kim, SH |
2017-01 | A probabilistic micromechanical modeling for electrical properties of nanocomposites with multi-walled carbon nanotube morphology | Yang, B. J.; Jang, Ji-un; Eem, Seung-Hyun; Kim, Seong Yun |
2023-04 | A strategy for dual-networked epoxy composite systems toward high cross-linking density and solid interfacial adhesion | Seo, Heun Young; Im, Dohyun; Kwon, Young Je; Nam, Chae Yun; Kim, Se Hun; Nam, Taegu; Kim, Changki; Vivek, E.; Baek, Kyong-Youl; Cho, Kie Yong; Yoon, Ho Gyu |
2016-09 | A Study of PP/Natural Fiber Composites Using Thermoplastic Lignin-polyester and Nanoclay | Park, In-Kyung; Hau, Neo Chun; Kim, Young Jun; Yun, Ju-Ho; Kim, Soo Hyun; Suhr, Jonghwan; Lee, Young-Kwan; Nam, Jae-Do |
2022-04 | A study of the correlation between the oxidation degree and thickness of graphene oxides | Park, Jaejun; Lee, Wonki; Nam, Jungtae; Han, Joong Tark; Choi, Chel-Jong; Hwang, Jun Yeon |
2024-01 | Accelerated thermostabilization through electron-beam irradiation for the preparation of cellulose-derived carbon fibers | MINJEONG, JANG; Fliri, Lukas; Trogen, Mikaela; Choi, Dongcheon; Han Jeongheum; Kim, Jung won; Kim, Sung-Kon; Lee, Sung Ho; Kim, Sung-Soo; Hummel, Michael |
2018-06 | Adhesion enhancement and damage protection for carbon fiber-reinforced polymer (CFRP) composites via silica particle coating | Kim, Kyungtae; Jung, Yong Chae; Kim, Seong Yun; Yang, B. J.; Kim, Jaewoo |
2014-09 | Adipose tissue: A valuable resource of biomaterials for soft tissue engineering | Choi, Ji Suk; Choi, Young Chan; Kim, Jae Dong; Kim, Eun Ji; Lee, Hee Young; Kwon, Ick Chan; Cho, Yong Woo |
2016-05 | Al-Si-N/a-SiN:H Thin-Film Coating for Polycarbonate Glazing Applications | An, Sehoon; Lee, Geun-Hyuk; Jang, Seong Woo; Kim, Young-Woo; Lim, Sang Ho; Kim, Donghwan; Han, Seunghee |
2006-08 | An analysis of accumulated deformation in the equal channel angular rolling (ECAR) process | Chung, Young Hoon; Park, Jong woo; Lee, Kyong Hwan |
2020-05 | An investigation of the corrosion behavior of 316L stainless steel fabricated by SLM and SPS techniques | Kale, Amol B.; Kim, Byung-Kyu; Kim, Dong-Ik; Castle, E. G.; Reece, M.; Choi, Shi-Hoon |
2009-10 | Analysis of microstructure and texture evolution in pure magnesium during symmetric and asymmetric rolling | Beausir, Benoit; Biswas, Somjeet; Kim, Dong Ik; Toth, Laszlo S.; Suwas, Satyam |
2006-02 | Anisotropic orientation of the carbon fiber/liquid crystalline epoxy resin composites | Hong, Soon Man; Hwang, Seung Sang |
2017-11 | Annealing effect on plastic flow in nanocrystalline CoCrFeMnNi high-entropy alloy: A nanomechanical analysis | Lee, Dong-Hyun; Lee, Jung-A; Zhao, Yakai; Lu, Zhaoping; Suh, Jin-Yoo; Kim, Ju-Young; Ramamurty, Upadrasta; Kawasaki, Megumi; Langdon, Terence G.; Jang, Jae-il |
2018-08 | Antimicrobial properties of lignin-decorated thin multi-walled carbon nanotubes in poly(vinyl alcohol) nanocomposites | Lee, Eun-Sil; Kim, Young-O; Ha, Yu-Mi; Lim, Daun; Hwang, Jun Yeon; Kim, Jaewoo; Park, Min; Cho, Jae Whan; Jung, Yong Chae |
2000-12-01 | Application of diamond-like carbon films to spacer tools for electron guns of cathode ray tube (CRT) | Jun, Y; Choi, JY; Lee, KR; Jeong, BK; Kwon, SK; Hwang, CH |
2021-10 | Artificial Neural Network for Modeling the Tensile Properties of Ferrite-Pearlite Steels: Relative Importance of Alloying Elements and Microstructural Factors | Hong, Tae-Woon; Lee, Sang-In; Shim, Jae-Hyeok; Lee, Myoung-Gyu; Lee, Joonho; Hwang, Byoungchul |
2024-03 | Atomic-scale structures determining the plasticity of metallic glasses viewed from the icosahedral medium-range orders and its spatial distribution | Kim, Hong-Kyu; Lee, Jae-Chul |
2009-10 | Atomistic modeling of the Cu-Zr-Ag bulk metallic glass system | Kang, K. -H.; Sa, I.; Lee, J. -C.; Fleury, E.; Lee, B. -J |
2012-10-30 | Atomistic simulations of diamond-like carbon growth | Joe, Minwoong; Moon, Myoung-Woon; Lee, Kwang-Ryeol |
2004-10 | Behavior of amorphous materials under hydrostatic pressures: A molecular dynamics simulation study | Lee, BJ; Lee, JC; Kim, YC; Lee, SH |
2013-02 | Biocompatibility and strength retention of biodegradable Mg-Ca-Zn alloy bone implants | Cho, Sung Youn; Chae, Soo-Won; Choi, Kui Won; Seok, Hyun Kwang; Kim, Yu Chan; Jung, Jae Young; Yang, Seok Jo; Kwon, Gyeong Je; Kim, Jong Tack; Assad, Michel |
2018-11 | Biodegradable sheath-core biphasic monofilament braided stent for bio-functional treatment of esophageal strictures | Han, Cheol-Min; Lih, Eugene; Choi, Seul-Ki; Bedair, Tarek M.; Lee, Young-Jae; Park, Wooram; Han, Dong Keun; Son, Jun Sik; Joung, Yoon Ki |
2013-09 | Biodegradable stereocomplex polylactide having flexible E >-caprolactone unit | Kang, Min Kyu; Jung, Youngmee; Kim, Soo Hyun |
2011-07 | Biomechanical Changes in the Sclera of Monkey Eyes Exposed to Chronic IOP Elevations | Girard, Michael J. A.; Suh, J. -K. Francis; Bottlang, Michael; Burgoyne, Claude F.; Downs, J. Crawford |