Properties and rapid consolidation of nanostructured WC and WC-10 vol.% TiAl3 hard materials by the high frequency induction heating

Title
Properties and rapid consolidation of nanostructured WC and WC-10 vol.% TiAl3 hard materials by the high frequency induction heating
Authors
윤진국이동구손인진
Keywords
Nanomaterials; Sintering; Hardness; Fracture toughness; Powder metallurgy
Issue Date
2016-04
Publisher
Journal of ceramic processing research
Citation
VOL 17, NO 4-326
Abstract
In the case of cemented WC, Ni or Co is added as a binder for the formation of composite structures. However, the high cost and the low hardness of Ni or Co, and the low corrosion resistance of the WC-Ni and WC-Co cermets have generated interest in recent years for alternative binder phases. In this study, TiAl3 was used as a novel binder and consolidated by the high frequency induction heated sintering (HFIHS) method. The method was found to enable not only the rapid densification but also the inhibition of grain growth preserving the nano-scale microstructure. Highly dense WC and WC-TiAl3 with a relative density of up to 99% was obtained within one min by HFIHS under a pressure of 80MPa. The addition of TiAl3 to WC enhanced the toughness without great decrease of hardness due to crack deflection and nanostructured phase.
URI
http://pubs.kist.re.kr/handle/123456789/64722
ISSN
1229-9162
Appears in Collections:
KIST Publication > Article
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML


qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE