Full metadata record

DC Field Value Language
dc.contributor.authorKatakam, Shravana-
dc.contributor.authorHwang, Jun Y.-
dc.contributor.authorPaital, Sameer-
dc.contributor.authorBanerjee, Rajarshi-
dc.contributor.authorVora, Hitesh-
dc.contributor.authorDahotre, Narendra B.-
dc.date.accessioned2024-01-20T13:32:19Z-
dc.date.available2024-01-20T13:32:19Z-
dc.date.created2021-08-31-
dc.date.issued2012-12-
dc.identifier.issn1073-5623-
dc.identifier.urihttps://pubs.kist.re.kr/handle/201004/128632-
dc.description.abstractIron-based amorphous materials, owing to their very high hardness, elastic modulus, wear resistance, and corrosion resistance, can be potential materials for surface modification and engineering of many structural alloys. The current study focuses on a novel functional coating, synthesized via laser cladding of an iron-based (Fe48Cr15Mo14Y2C15B) amorphous precursor powder, on AISI 4130 steel substrate, using a continuous-wave diode-pumped ytterbium laser. The coatings were characterized by different techniques like X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). SEM and TEM studies indicated the presence of Fe-based nanocrystalline dendrites intermixed within an amorphous matrix. A three-dimensional thermal modeling approach based on COMSOL Multiphysics (COMSOL Inc., Burlington, MA) was used to approximately predict the temperature evolution and cooling rates achieved during laser processing. The mechanisms for the formation of crystalline phases and the morphological changes in the microstructure were studied based on the thermal model developed. Although the thermal model predicted substantially high cooling rates as compared to the critical cooling rate required for retaining an amorphous phase, the formation of crystalline phases is attributed to formation of yttrium oxide, reducing the glass-forming ability, and formation of different oxide phases that act as heterogeneous nucleation sites resulting in the composite microstructure.-
dc.languageEnglish-
dc.publisherSPRINGER-
dc.subjectMECHANICAL-PROPERTIES-
dc.subjectMAGNETIC-PROPERTIES-
dc.subjectPOWDER DEPOSITION-
dc.subjectMELT POOL-
dc.subjectMICROSTRUCTURE-
dc.subjectALLOYS-
dc.subjectGLASS-
dc.subjectHVOF-
dc.titleIn Situ Laser Synthesis of Fe-Based Amorphous Matrix Composite Coating on Structural Steel-
dc.typeArticle-
dc.identifier.doi10.1007/s11661-012-1312-4-
dc.description.journalClass1-
dc.identifier.bibliographicCitationMETALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, v.43A, no.13, pp.4957 - 4966-
dc.citation.titleMETALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE-
dc.citation.volume43A-
dc.citation.number13-
dc.citation.startPage4957-
dc.citation.endPage4966-
dc.description.journalRegisteredClassscie-
dc.description.journalRegisteredClassscopus-
dc.identifier.wosid000311511300006-
dc.identifier.scopusid2-s2.0-84870450016-
dc.relation.journalWebOfScienceCategoryMaterials Science, Multidisciplinary-
dc.relation.journalWebOfScienceCategoryMetallurgy & Metallurgical Engineering-
dc.relation.journalResearchAreaMaterials Science-
dc.relation.journalResearchAreaMetallurgy & Metallurgical Engineering-
dc.type.docTypeArticle-
dc.subject.keywordPlusMECHANICAL-PROPERTIES-
dc.subject.keywordPlusMAGNETIC-PROPERTIES-
dc.subject.keywordPlusPOWDER DEPOSITION-
dc.subject.keywordPlusMELT POOL-
dc.subject.keywordPlusMICROSTRUCTURE-
dc.subject.keywordPlusALLOYS-
dc.subject.keywordPlusGLASS-
dc.subject.keywordPlusHVOF-
Appears in Collections:
KIST Article > 2012
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML

qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE