Tribological behavior of plasma sprayed Al-Cu-Fe plus Sn quasicrystalline composite coatings

Authors
Shao, TMCao, XKFleury, EKim, DHHua, MSe, D
Issue Date
2004-03-15
Publisher
ELSEVIER SCIENCE BV
Citation
JOURNAL OF NON-CRYSTALLINE SOLIDS, v.334, pp.466 - 470
Abstract
In this paper, we intend to present results on the effect of a soft phase,on the tribological properties of Al-Cu-Fe-based composite coatings. Quasicrystalline-based composite powders with a Sn volume fraction varying from 0% to 30% were prepared by gas atornization before deposition onto medium carbon steel substrates by the air plasma spray technique. The friction and wear behavior of the QC composite coatings was investigated in dry air with a ball-on-disk test machine under reciprocating motion. The results of this experimental investigation indicated that the addition of 20 vol.% Sn enabled an improvement of the wear owing to an enhancement of the fracture toughness of the composite coatings. (C) 2004 Elsevier B.V. All rights reserved.
Keywords
HIGH-STRENGTH; ALLOYS; HIGH-STRENGTH; ALLOYS; QC composite coating; plasma spray; ductile phase; friction and wear
ISSN
0022-3093
URI
https://pubs.kist.re.kr/handle/201004/137761
DOI
10.1016/j.jnoncrysol.2003.12.025
Appears in Collections:
KIST Article > 2004
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML

qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE