High performance piezoelectric MEMS energy harvester based on D33 mode of PZT thin film on buffer-layer with PbTIO3 inter-layer

Title
High performance piezoelectric MEMS energy harvester based on D33 mode of PZT thin film on buffer-layer with PbTIO3 inter-layer
Authors
박종철이덕현박재영장영수이윤표
Keywords
energy harvester; piezoelectric effect; ambient vibration; micromachining; PZT; PbTiO3
Issue Date
2009-07
Publisher
15th International Conference on Solid-State Sensors, Actuators & Microsystem Tranducers 2009
Citation
VOL M3P, 517-520
Abstract
In this paper, a MEMS energy harvester was investigated to scavenge power from ambient vibration source. It was designed to convert low level vibration to electrical power via the piezoelectric effect. The proposed energy harvester was fabricated by patterning Pt electrodes into inter-digital geometry on top of the sol–gel-spin coated Pb(Zr,Ti)O3 thin film for d33 mode on silicon cantilever with proof mass. In order to obtain well grown PZT thin film, PbTiO3 seed-layer was newly applied as an inter-layer between PZT and ZrO2 layer. The fabricated energy harvester generated 1.1uW of electrical power to 2.2MΩ of load with 4.4Vpeak-to-peak from a vibration of 0.39g acceleration at it resonant frequency of 528Hz. The corresponding power density was 2.8mW·cm-3·g-1.
URI
http://pubs.kist.re.kr/handle/201004/35557
ISSN
978-1-424
Appears in Collections:
KIST Publication > Conference Paper
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML


qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE