Full metadata record
|dc.identifier.citation||VOL 49, NO 10, 1116-1124||-|
|dc.description.abstract||The aim of this study was to investigate the adsorption of bacteriophage MS2 by magnetic iron oxide nanoparticles in aqueous solutions. The characteristics of synthetic nanoparticles were analyzed using various techniques. The adsorption of MS2 to the nanoparticles was examined under various conditions using batch experiments. The results showed that the nanoparticles were mainly composed of maghemite along with goethite. The nanoparticles had a specific surface area of 82.2 m2 g−1, with an average pore diameter of 13.2 nm and total pore volume of 0.2703 cm3 g−1. The results demonstrated that the removal of MS2 by the nanoparticles was very fast. A 3.15 log removal (99.93%) was achieved within 60 min (adsorbent dose = 2 g L−1; MS2 concentration = 2.94 × 106 pfu mL−1). The log removal decreased from 3.52 to 0.36 with increasing MS2 concentration from 1.59 × 104 to 5.01 × 107 pfu mL−1. Also, the effect of solution pH on MS2 removal was minimal at pH 4.2–8.4. The removal of MS2 decreased in the presence of anions such as carbonate and phosphate, with the latter showing a greater hindrance effect on removal. This study demonstrated that magnetic iron oxide nanoparticles are very effective in the removal of MS2 from aqueous solutions.||-|
|dc.publisher||Journal of environmental science and health. Part A, Toxic/hazardous substances & environmental engineering||-|
|dc.subject||magnetic iron oxide nanoparticles||-|
|dc.title||Adsorption of bacteriophage MS2 to magnetic iron oxide nanoparticles in aqueous solutions||-|
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.