Densified biocoal from woodchips: Is it better to do torrefaction before or after densification?

Title
Densified biocoal from woodchips: Is it better to do torrefaction before or after densification?
Authors
Bahman GhiasiLinoj KumarTakaaki FurbayashiC. Jim LimXiaotao Bi김창수Shahab Sokhansanj
Keywords
Biomass; Torrefaction; Densification; Torrefied pellet; Densified biocoal
Issue Date
2014-12
Publisher
Applied energy
Citation
VOL 134, 133-142
Abstract
Torrefied biomass represents a high quality renewable energy commodity that can be used to substitute fossil fuels such as coal. However, densification processes such as pelletisation is necessary to improve the tradability of “low-dense” torrefied biomass. In this work, two process pathways were assessed for energy and mass balance in making torrefied pellets from softwood chips and qualities of the resulting torrefied pellets were compared. Pathway I involve drying the wood chips, torrefaction, grinding followed by densification. In pathway II, wood chips were dried, ground, densified and finally torrefied. The results showed that it was difficult to bind the torrefied biomass particles and a binding agent was necessary to enable their effective pelletisation with reasonable energy consumption. In contrary, pelletization of raw materials was possible without using binding agents and when the “raw wood pellets” were torrefied, the pellets surprisingly stayed intact and had several promising properties such as higher energy/carbon value, reduced moisture content and higher stability in water. In addition, the pathway II was more efficient in terms of overall energy and material balance.
URI
http://pubs.kist.re.kr/handle/201004/48062
ISSN
03062619
Appears in Collections:
KIST Publication > Article
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML


qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE