Solid-state polymerization and characterization of a copolyamide based on adipic acid, 1,4-butanediamine, and 2,5-furandicarboxylic acid

Title
Solid-state polymerization and characterization of a copolyamide based on adipic acid, 1,4-butanediamine, and 2,5-furandicarboxylic acid
Authors
이현주김낙균엔다이홍식한상훈김재훈김우년
Issue Date
2016-05
Publisher
Journal of applied polymer science
Citation
VOL 133, NO 18, 43391-43398
Abstract
2,5-Furandicarboxylic acid (FDCA) is a promising biobased alternative material to terephthalic acid. In this study, three types of poly(butylene adipamide) (PA-4,6) containing 10, 20, and 30 mol % of poly(butylene-2,5-furandicarboxylamide) (PA-4,F) were synthesized through consecutive prepolymerization and solid-state polymerization (SSP). The incorporation of a 10 mol % PA-4,F component into PA-4,6 resulted in slight increases in the intrinsic viscosity (IV) and glass-transition temperature (Tg) after 12 h of SSP at 220 °C. When the SSP temperature and reaction time increased, IV increased proportionally. The highest IV value of 0.75 was obtained by 48 h of SSP at 240 °C, whereas increases in the PA-4,F content to 20 and 30 mol % gave rise to decreases in IV, Tg, and melting temperature; this interrupted the increase in SSP temperature. The thermal decomposition temperature of the PA-4,F-incorporated polyamide was lower than that with PA-4,6 because of the lower thermal stability of the FDCA component.
URI
http://pubs.kist.re.kr/handle/201004/59211
ISSN
00218995
Appears in Collections:
KIST Publication > Article
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML


qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE