Oxidation of gaseous formaldehyde with ozone over MnOx/TiO2 catalysts at room temperature (25 oC)

Title
Oxidation of gaseous formaldehyde with ozone over MnOx/TiO2 catalysts at room temperature (25 oC)
Authors
정종수박은석김민수
Keywords
MnO2; Ozone; Catalytic; Oxidation; Formaldehyde
Issue Date
2018-02
Publisher
Powder technology
Citation
VOL 325-372
Abstract
The TiO2 support materials were synthesized by a chemical vapor condensation (CVC) method and the subsequent MnOx/TiO2 catalysts were prepared by an impregnation method in our previous studies. Catalytic oxidation of formaldehyde on the MnOx/TiO2 catalysts was examined with ozone. Formaldehyde (HCHO) is a specific volatile organic compound (VOC) found in indoor air of both residential places and workshops and must be removed to improve air quality. Catalytic oxidative decomposition of HCHO at room temperature (25 °C) is considered one of the most promising strategies for this. In this study, MnOx/TiO2 was prepared using chemical vapor condensation (CVC) as a HCHO ozone (O3) catalyst that operates at 25 °C. In this catalytic oxidation experiment, the HCHO of the gas stream on the MnOx/CVC-TiO2 catalyst was completely oxidized to CO2 with the addition of O3. The removal efficiency of HCHO increased from 35.3% to 100% as the O3:HCHO ratio increased from 1 to 5. COX selectivity also increased significantly with the increasing O3:HCHO ratio. As the relative humidity (RH) increased, HCHO removal efficiency and mineralization to CO2 increased. The HCHO removal efficiency increased to 100% at RH= 50%, whereas it was 85% at RH= 10%. The mineralization to CO2 increased to 100% at RH= 80%, and was 15% at RH= 10%.
URI
http://pubs.kist.re.kr/handle/201004/67093
ISSN
0032-5910
Appears in Collections:
KIST Publication > Article
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML


qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE