An On-chip Chemiluminescent Immunoassay for Bacterial Detection using in Situ-synthesized Cadmium Sulfide Nanowires with Passivation Layers

Title
An On-chip Chemiluminescent Immunoassay for Bacterial Detection using in Situ-synthesized Cadmium Sulfide Nanowires with Passivation Layers
Authors
박재관강민정Hong-Rae KimJi-Hong BongJaeyong JungJeong Soo SungJae-Chul Pyun
Keywords
CdS nanowire; Photosensor; Surface passivation; On-chip immunoassay
Issue Date
2020-09
Publisher
BioChip Journal
Citation
VOL 14, NO 3-278
Abstract
The passivation layers of an in situ-synthesized cadmium sulfide (CdS) nanowire (NW) photosensor were prepared for two reasons: (1) to improve the physical stability of the NW on an interdigitated electrode and (2) to enhance the immobilization efficiency of proteins for the on-chip immunoassay. The passivation layer was estimated to have suitable optical properties, and the photoresponse of photosensor was increased after the formation of passivation layer. The immobilization efficiency of a parylene-H film through covalent bonding was compared with the immobilization of Z-domains through physical adsorption. Finally, on-chip chemiluminescent immunoassay of bacteria was carried out by immobilizing antibodies against Escherichia coli through Z-domains for the orientation control of antibodies. The limit of detection was determined to be less than 104 E. coli/mL (n=3), and the sensitivity of bacterial detection was estimated to be 0.339 pA/E. coli/mL (n=3) with a linearity factor (R2 ) of 0.999. These results showed that the on-chip chemiluminescent immunoassay for bacterial detection could be performed using passivation layer coated CdS NW photosensor.
URI
http://pubs.kist.re.kr/handle/201004/72095
ISSN
1976-0280
Appears in Collections:
KIST Publication > Article
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML


qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE