2015-08 | Improvement of coating adhesion ability on magnesium by femtosecond laser surface modification | 박재호; 한형섭; 이선희; 박지민; 김유찬; 옥명렬; 석현광; 정석; 이지욱; 전호정 |
2000-02 | Interfacial phenomena in the SiC/2014Al composite : tailoring the interfaces | 이재철; 안재평; 심재혁; 석현광; 이호인 |
2023-06-06 | M1 대식세포로의 선택적 분화방법 | 전호정; 서영민; 서현선; 오승자; 김유찬; 석현광; 옥명렬 |
2021-03-25 | M1 대식세포로의 선택적 분화방법 | 전호정; 서영민; 서현선; 오승자; 김유찬; 석현광; 옥명렬 |
2000-11 | Macroscopic heat transfer model in electric arc spray forming of low carbon steel ring | 석현광; 이재철; P.S. Grant; 이호인 |
2009-12 | Manufacturing and Properties of Carbon Nanotube-Aluminum Nanocomposite | 한준현; 석현광; 지광구 |
2000-11 | Material properties of the short fiber reinforced Al alloy composite II : Effect of the interfacial reaction | 석현광; 하용식; 이호인; 이재철 |
1998-10 | Microstructural evolutions in hypereutectic Al-Si alloy during spray forming and extrusion | 김상균; 석현광; 이재철; 이호인; 신돈수; 나형용 |
1998-01 | Numerical analysis on temperature profile of spray formed rod by B. F. C | 석현광; 여동훈; 오규환; 윤종규; 나형용; 이호인 |
1997-01 | Numerical analysis on the characteristics of convergence to steady state in spray forming of rod (I) - Steady state of forming process in 3-d model | 석현광; 오규환; 이호인; 나형용 |
1997-01 | Numerical analysis on the characteristics of convergence to steady state in spray forming of rod (II) - The characteristics of convergence to steady state at various process parameters | 석현광; 오규환; 이호인; 나형용 |
1998-06 | Optimization of initial process parameter in spray forming (I) : control of the initial melt temperature | 이재철; 석현광; 신돈수; 이호인 |
2015-10 | Overview of long term clinical study performed in Korea | 한형섭; 김유찬; 석현광 |
1996-01 | Phase identification of the interfacial reaction product of SiC//p/Al composite using convergent beam electron diffraction technique. | 이정일; 이재철; 석현광; 이호인 |
2005-07 | Processing of Metallic Materials by Gas Atomized Spray Forming | 백경호; 석현광 |
2022-05 | R&D 가치평가를 위한 다면적 접근: KIST 방역 R&D 사례를 중심으로 | 임혜진; 김찬수; 석현광; 조한얼 |
2001-03 | Straining hardening of the Al alloy sheet during cold rolling and equal channel angular pressing | 이재철; 석현광; 정영훈; 이호인 |
2005-01 | Synthesis of ceramic protective coatings for chemical plant parts operated in hi-temperature and corrosive/erosive environment | 손명찬; 박정래; 홍경태; 석현광 |
2015-09-03 | T7 박테리오파지를 이용한 표적-특이적 프로브 및 이를 이용한 바이오마커의 탐지 | 이관희; 최종훈; 황민태; 송장원; 석현광; 이종욱 |
2015-08 | Tailored Mg-Zn-Ca alloy for biomedical application | 노형진; 한형섭; 이지욱; 석현광; 김도향; 김유찬 |
2014-08 | The Evaluation of Histological Methods for Biodegradable Magnesium | 한형섭; 한지혜로; 김유찬; 석현광; 이지욱; 양석조 |
2000-11 | The splat boundary coalescence fraction of electric arc spray formed low carbon steel (Fe-0.06%C steel) | 석현광; P.S. Grant; 이재철; 이호인 |
2017-07-03 | Transcription Activator-Like Effector (TALE) 도메인을 이용한 표적 DNA 탐지방법 | 장근혁; 전민홍; 석현광; 이석; 이관희 |
2006-05 | 가스분무성형 Cu-10Cr 합금의 열적응고거동 및 미세조직 | 백경호; 강희수; 석현광 |
2020-05-07 | 가압환경 세포의 배양 장치 및 배양 방법 | 전호정; 서영민; 서현선; 김유찬; 전정호; 옥명렬; 석현광; 김성원; 박선화; 박귀덕 |
2023-04-10 | 감염 확산 예방을 위한 향 인지 판단을 포함하는 비대면 키오스크 기반 출입 통제 시스템 및 그 방법 | 김익재; 석현광; 조정현; 박해솔; 김학섭; 남기표; 최희승 |
2006-06-09 | 고속 주조용 다중분무성형장치 | 석현광; 김기배; 이호인; 김유찬; 에릭플러리 |
2011-08-02 | 고체 원소 플라즈마 이온주입 방법 및 장치 | 한승희; 변지영; 석현광; 신상범; 김유찬; 이성배; 최진영; 한준현 |
2015-09-22 | 고체 원소 플라즈마 이온주입 방법 및 장치 | 한승희; 변지영; 석현광; 신상범; 김유찬; 이성배; 최진영; 한준현 |
2023-09-26 | 광치료용 니들 패치 및 이의 제조 방법 | 옥명렬; 김소연; 정윤기; 김유찬; 석현광; 김재균; 전호정; 서현선; 김인호; 박경원; 정용우; 한형섭 |