| 1993-12 | 13C-NMR에 의해 결정된 탄소 유형별 구조적 조성으로부터 디이젤 연료의 세탄가의 예측에 관한 연구 | 최주환; 전용진; 최웅수; 최영상; 권오관 |
| 1999-06 | A study on the application of spectrometric methods for the analysis of lubricant contaminants and wear debris. | 공호성; 한흥구; 권오관 |
| 1995-01 | A study on the approximation of involute curve as circular arcs for NC machining. | 이성철; 권오관 |
| 1994-01 | A study on the development of condition monitoring technology for turbine lubricating systems in power plants. | 신규식; 김재평; 남창현; 백수곤; 권오관; 안효석; 윤의성; 손동구 |
| 1988-01 | A study on the effect of physico - chemical factors in wear mechanism in a lubricated concentrated contact (II). | 최웅수; 권오관; 문탁진; 유영홍 |
| 1995-01 | A study on the filtration characteristics of magnetic fibrous polymeric filter with packing density profile as a new oil filter. | 최기영; 안병길; 최웅수; 권숙인; 권오관 |
| 1989-01 | A study on the frictional characteristics of paper facing. | 안병길; 최웅수; 권오관; 문탁진 |
| 1990-01 | A study on the frictional characteristics of wet-clutch friction materials in accordance with composition. | 강전익; 한흥구; 최웅수; 권오관 |
| 1989-01 | An experimental study of cutting abilities of an abrasive water jet system. | 권오관; 안영재; 유장열; 김영조 |
| 1998-12 | An experimental study on friction and wear characteristics of air curable MoS//2 bonded films with polymeric binder materials | 한흥구; 공호성; 윤의성; 권오관 |
| 1998-01 | An experimental study on friction and wear characteristics of air-curable MoS2 films with polymeric binder | 한흥구; 공호성; 권오관 |
| 2000-06 | An experimental study on the anti-corrosion and anti-wear characteristics of MoS₂ bonded films for automotive wheel joints | 한흥구; 공호성; 윤의성; 권오관 |
| 1997-01 | An experimental study on the rolling resistance of bearing surfaces covered by pure silver film | 양승호; 윤의성; 공호성; 권오관 |
| 1993-03 | Analysis of fretting contact by linear complementarity problem formulation | 이성철; 곽병만; 권오관 |
| 1987-01 | Bearing fault diagnosis bycondition monitoring method. | 권오관; 이정철; 오재응; 염성하 |
| 1985-01 | CAD optimisation of the planocentric gears from EHL(elasto-hydrodynamic lubrication) concept. | 이성철; 권오관; 김이범 |
| 1996-01 | Cavity design for injection molded gears by the compensation method of design parameters. | 이성철; 김충현; 권오관; 허용정 |
| 1998-06 | Condition monitoring technology for plant machinery system based on integrated wear monitoring | 윤의성; 장래혁; 공호성; 한흥구; 권오관; 송재수; 김재덕; 엄형섭 |
| 1979-01 | Effects of metallatic dialkyldihiophosphates on lubricating oil. | 권오관; 문탁진 |
| 1998-01 | Electrorheological properties of anhydrous ER suspensions based on phosphated cellulose | 안병길; 최웅수; 권오관; 문탁진 |
| 2001-04 | Electrorheological properties of cellulose phosphate ester suspension by conduction models | 최웅수; 고영건; 박용성; 권오관 |
| 1999-03 | Electrorheological properties of phosphoric ester cellulose ER fluids on the elevated temperature | 안병길; 오경근; 최웅수; 권오관 |
| 1998-12 | Electrorheology of chitosan suspensin by conduction models | 최웅수; 안병길; 이상순; 권오관 |
| 1970-01 | EP and wear of some Korean greases. | 권오관; 문탁진; 송흥원 |
| 1996-01 | Evaluation of the sliding frictional characteristics at the different loading mechanisms and normal stiffness. | 윤의성; 공호성; 권오관; 오재응 |
| 1996-01 | Experimental studies on friction and wear of the solid lubricating MoS//2 bonded films. | 공호성; 윤의성; 한흥구; 권오관 |
| 1998-12 | Filtration characteristics of polymeric porous materials composed of polypropylene and polyethylene | 안병길; 오경근; 최웅수; 권오관 |
| 1993-01 | Friction and wear at ceramic coated surfaces of aluminum alloy. | 공호성; 권오관; 김형선 |
| 1994-01 | Friction and wear at dry sliding low carbon steel surfaces under vacuum conditions. | 공호성; 윤의성; 권오관 |
| 1990-12 | Friction and wear behavior of graphite fiber-reinforced composites. | 심현해; 권오관; 윤재륜 |
