| 2003-09 | A fuzzy expert system based on hybrid database for fault diagnosis of industrial turbomachinery. | 백두진; 이용복; 김승종; 김창호; 장건희 |
| 1997-01 | A numerical analysis on the rotordynamic characteristics of a hybrid journal bearing with pair-type angled injection orifices | 김창호; 이용복 |
| 2006-12 | A Study on the Air Foil Journal Bearing Analysis with Perturbed Rarefaction Coefficients | 이용복; 박동진; 김창호; 장건희 |
| 2001-12 | A study on the lift-off characteristics of an air-lubricated bump foil journal bearing | 이용복; 이남수; 최동훈; 김창호 |
| 2001-08 | A study on the lift-off characteristics of an air-lubricated multi-leaf foil journal bearing | 이용복; 김태호; 김창호; 이남수; 장건희 |
| 2003-03 | A study on the oil-free turbocharger supported by air foil bearing. | 이용복; 김태호; 김창호; 사종성; 이남수 |
| 1992-01 | A study on the parameter identification for a mechanical dynamic system using a time-domain extended kalman filter algorithm. | 김창호; 이용복; 사종성; 김광식 |
| 2003-06 | A study on the reliability of an air foil journal bearing for high speed turbomachinery. | 김태호; 이용복; 김창호; 이남수 |
| 2003-06 | A study on the rotordynamic stability of turbo pump unit. | 곽현덕; 이용복; 김창호; 하태웅; 유우철 |
| 2006-10 | A study on the structural stiffness and coulomb damping of air foil bearing considering the interaction among bumps | 박동진; 김창호; 이용복 |
| 1996-01 | An analysis for turbulent hybrid bearings with fluid inertia and swirl injection effects. | 이용복; 김창호; 최동훈 |
| 1996-01 | An application of the instrumental variable method (IVM) to parameter identification of a noise contaminated bearing test rig. | 이용복; 김창호; 최동훈 |
| 1995-01 | An optimal correction balancing of a high-speed flexible rotor. | 이용복; 김창호; 이동수; 최동훈 |
| 2001-06 | An optimal design of an ER-SFD supporting a rigid rotor system | 이용복; 김종립; 이남수; 김창호; 최동훈 |
| 1985-07 | Analysis and testing for rotordynamic coefficients of turbulent annular seals with different, directionally-homogeneous surface-roughness treatment for rotor and stator elements. | 김창호; D. W. Childs |
| 1986-01 | Analysis for rotordynamic coefficients of helically-grooved trubulent annualr seals. | 김창호; D. W. Childs |
| 2000-12 | Characteristics of a coupled gas lubricated bearing for a scaled-up micro gas turbine | 이용복; 곽현덕; 김창호; 장건희 |
| 1999-01 | Contact point analysis for wheel/rail contact force calculation | 박정훈; 임진수; 황요하; 김창호 |
| 2001-06 | Critical speeds evaluation of turbo pump unit with a elasticring inserted ball bearing | 이용복; 김창호; 곽현덕; 하태웅; 우유철 |
| 2000-04 | Damping performance analysis of electro-rheological squeeze film damper sealed with slotted rings | 정시영; 김창호; 이용복 |
| 2000-11 | Dynamic coefficients of a high-speed rotor supported by a slotted ER squeeze film damper | 이용복; 김창호; 정시영; 이남수; 최동훈 |
| 2001-08 | Dynamic stability and leakage characteristics of turbo pump unit installed with high-pressure seals | 이용복; 곽현덕; 김창호; 하태웅 |
| 2002-08 | Electromechanical characteristics of a squirrel cage induction motor due to broken rotor bars and rotor eccentricity | 박상진; 장정환; 장건희; 이용복; 김창호 |
| 2000-06 | Experimental parametric study on the rotordynamic characteristics and optimal design of a flexible rotor supported by a slotted-ring electro-rheological squeeze film damper | 이용복; 김창호; 이남수; 최동훈; 정시영 |
| 2001-12 | Feasibility study on design of thrust bearing for micro gas turbine generator | 이용복; 곽현덕; 김창호; 장건희 |
| 1990-01 | Labyrinth seal 내 누수량에 미치는 축 회전속도의 영향 | 이관수; 이상욱; 김창호 |
| 2003-12 | Leakage and Rotordynamic Analysis of Damper Floating Ring Seal with RoundHole Surfaces in the High Pressure Turbo Pump | 하태웅; 이용복; 김창호 |
| 2001-12 | Leakage and rotordynamic analysis of high pressure floating ring seal in turbo pump. | 하태웅; 이용복; 김창호 |
| 2001-12 | MEMS/MST 고속 회전체 요소의 안정성에 관한 연구 | 이용복; 곽현덕; 김창호 |
| 1999-01 | Partitioning method using kinematic uncoupling in train dynamics | 박정훈; 유홍희; 황요하; 김창호 |
