Do, Lien Thi Choi, Jae-Wook Suh, Dong Jin Yoo, Chun-Jae Lee, Hyunjoo Ha, Jeong-Myeong 2024-01-19T13:04:46Z 2024-01-19T13:04:46Z 2021-10-21 2021-12 0926-3373 https://pubs.kist.re.kr/handle/201004/116034 The oxidative coupling of methane (OCM) using hybrid catalysts containing BaTiO3 perovskite and Mn-Na2WO4 exhibited high activity and high selectivity at low temperature: 66.3 % C2+ (olefins and paraffins) selectivity and 25.9 % C2+ yield at 700 degrees C which is 100 degrees C lower than that used for Mn-Na2WO4 catalysts (800 degrees C). Upon the preparation of complex catalysts, the insertion of Mn into BaTiO3 (BaTi(Mn)O-3) and the formation of NaxMn(Ti) O-2 improved the oxygen-supplying ability of the catalysts. Additionally, strong interactions between the WO(4)(2-)anions and BaTi(Mn)O-3 or NaxMn(Ti)O-2 stabilized the WO42- anions on the surface and improved the methane activation ability of the catalysts for the favorable production of hydrocarbons. The nanoscopic modification of catalysts was confirmed using H-2-temperature-programmed reduction, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and Raman spectroscopy results. English Elsevier BV Hybrid catalysts containing Ba, Ti, Mn, Na, and W for the low-temperature oxidative coupling of methane Article 10.1016/j.apcatb.2021.120553 1 Applied Catalysis B: Environmental, v.298 Applied Catalysis B: Environmental 298 Y scie scopus 000696894800004 2-s2.0-85111474512 Chemistry, Physical Engineering, Environmental Engineering, Chemical Chemistry Engineering Article TUNGSTEN-OXIDE CATALYSTS NA2WO4/MN/SIO2 CATALYST REACTION NETWORK MN/NA2WO4/SIO2 MN-NA2WO4/SIO2 DECOMPOSITION PEROVSKITES PERFORMANCE FEATURES MODEL Oxidative coupling Methane BaTiO3 Mn-Na2WO4