Ryu, J Jeong, Y Tak, Y Kim, B Kim, B Park, JO 2024-01-19T15:38:36Z 2024-01-19T15:38:36Z 2022-03-07 2002 https://pubs.kist.re.kr/handle/201004/117630 In this paper, we present a micro robot using IPMC (Ionic Polymer Metal Composite) actuators. The IPMC actuator usually has been fabricated with commercially available ion-exchange polymer with the typical thickness of 100-300 mum. By the casting of liquid ion-exchange polymer solution, the thickness of the IPMC actuator could increase up to a few millimeters. Based on the casting method, we could achieve the IPMC actuator that has larger stiffness and produces more generative tip force than the IPMC actuator fabricated with the commercially available solid ion-exchange polymer. A ciliary type 8-legged micro robot using the casting based IPMC actuators is constructed. The ciliary type 8-legged micro robot is 6.5 cm in length and 4.2 cm in width, and 1.5 cm in height and the total weight is 4.4 g with the actuators installed. The IPMC actuators used in this robot have a dimension of 20 mm in length, 4 mm in width and 1.15 mm in thickness. The input voltage to the IPMC actuator is set to +/-4 V and the frequencies to the IPMC actuator is varying from 0.2 Hz to 1.0 Hz with the increment of 0.2 Hz. The walking speed of the micro robot is changed from 3 mm/min to 17 mm/min with the variation of the frequencies. English IEEE A ciliary motion based 8-legged walking micro robot using cast IPMC actuators Conference 1 International Symposium on Micromechatronics and Human Science, pp.85 - 91 International Symposium on Micromechatronics and Human Science 85 91 US NAGOYA MUNICIPAL IND RES INST, NAGOYA, JAPAN 2002-10-20 MHS2002: PROCEEDINGS OF THE 2002 INTERNATIONAL SYMPOSIUM ON MICROMECHATRONICS AND HUMAN SCIENCE 000180884200015 2-s2.0-84951864550 Proceedings Paper