Ko, Youngpyo Yoon, Hyungsuk Kwon, Seulki Lee, Hyunjung Park, Min Jeon, Insu Lim, Jung Ah Chung, Seungjun Lee, Sang-Soo Sung, Bong June Kim, Jong-Ho Kim, Heesuk 2024-01-19T16:03:40Z 2024-01-19T16:03:40Z 2021-09-02 2020-11-15 1359-8368 https://pubs.kist.re.kr/handle/201004/117846 As practical interest in wearable electronic devices and biomimetic transducers increases, the demand for elastomers with excellent dielectric behavior as well as good mechanical properties is growing. Herein, we propose a new concept of carbon black (CB)-embedded polydimethylsiloxane (PDMS) composites with high dielectric properties via a one-pot process. The dispersant-grafted CB3wt%/PDMS composites show an enhanced dielectric constant of 1090 with low loss tangent as low as 0.45 at 100 Hz, which is 340- and 145-fold higher than those of the pure PDMS and dispersant-free CB3wt%/PDMS, respectively. Experimental and simulation studies demonstrate that the dielectric properties of CB/PDMS composites depend on the CB dispersion in the PDMS matrix, which is influenced by the chain length of dispersant and the amount of residual dispersant. As a proof of concept, the capacitive pressure sensor based on CB/PDMS flat structure has been demonstrated, exhibiting 46-fold larger capacitance change than the pure PDMS based sensor. These results indicate that the sensor sensitivity can be significantly improved without additional micro-structuring and the large capacitance change enhances a tolerance to external noise sources. We believe that the elastomers with high dielectric properties show great potential for electronic applications including capacitive pressure sensors that should respond to various input pressures. English ELSEVIER SCI LTD THERMOPLASTIC POLYURETHANE CARBON NANOTUBES NANOCOMPOSITES PRESSURE SENSORS HYBRID STRAIN PERMITTIVITY PERFORMANCE IMPROVEMENT Elastomeric high-kappa composites of low dielectric loss tangent: Experiment and simulation Article 10.1016/j.compositesb.2020.108337 1 COMPOSITES PART B-ENGINEERING, v.201 COMPOSITES PART B-ENGINEERING 201 scie scopus 000581931600010 2-s2.0-85090233796 Engineering, Multidisciplinary Materials Science, Composites Engineering Materials Science Article THERMOPLASTIC POLYURETHANE CARBON NANOTUBES NANOCOMPOSITES PRESSURE SENSORS HYBRID STRAIN PERMITTIVITY PERFORMANCE IMPROVEMENT Nanocomposites Dielectric properties Capacitive-pressure sensing Simulation