Park, Tae Young Pahk, Ki Joo Kim, Hyungmin 2024-01-19T19:03:14Z 2024-01-19T19:03:14Z 2021-09-05 2019-10 0169-2607 https://pubs.kist.re.kr/handle/201004/119504 Background and Objective: Transcranial focused ultrasound (tFUS) is a promising neuromodulation technique because of its non-invasiveness and high spatial resolution (within millimeter scale). However, the presence of the skull can lead to disrupting and shifting the acoustic focus in the brain. In this study, we propose a computationally efficient way to determine the optimal position of a single-element focused ultrasound transducer which can effectively deliver acoustic energy to the brain target. We hypothesized that the placement of a single element transducer with the lowest average reflection coefficient would be the optimal position. Methods: The reflection coefficient is defined by the ratio of the amplitude of the reflected wave to the incident wave. To calculate the reflection coefficient, we assumed ultrasound waves as straight lines (beam lines). At each beam line, the reflection coefficient was calculated from the incidence angle at the skull interface (outer/inner skull surfaces). The average reflection coefficient (ARC) was calculated at each possible placement of the transducer using a custom-built software. For comparison purposes, acoustic simulations (k-Wave MATLAB toolbox) which numerically solved the linear wave equation were performed with the same transducer positions used in the ARC calculation. In addition, the experimental validation of our proposed method was also performed by measuring acoustic wave propagation through the calvaria skull phantom in water. The accuracy of our method was defined as the distance between the two optimal transducer placements which were determined from the acoustic simulations and from the ARC method. Result: Simulated acoustic pressure distribution corresponding to each ARC showed an inverse relationship with peak acoustic pressures produced in the brain. In comparison to the acoustic simulations, the accuracy of our method was 5.07 +/- 4.27 mm when targeting the cortical region in the brain. The computing time of ARC calculations were 0.08% of the time required for acoustic pressure simulations. Conclusion: We calculated the ARC to find the optimal position of the tFUS transducer used in the present study. The optimal placement of the transducer was found when the ARC was the lowest. Our numerical and experimental results showed that the proposed ARC method can effectively be used to find the optimal position of a single-element tFUS transducer for targeting the cortex region of the brain in a computationally inexpensive way. (C) 2019 Elsevier B.V. All rights reserved. English ELSEVIER IRELAND LTD MOTOR AREA PROPAGATION VALIDATION SIMULATION Method to optimize the placement of a single-element transducer for transcranial focused ultrasound Article 10.1016/j.cmpb.2019.104982 1 COMPUTER METHODS AND PROGRAMS IN BIOMEDICINE, v.179 COMPUTER METHODS AND PROGRAMS IN BIOMEDICINE 179 scie scopus 000482082100004 2-s2.0-85068969303 Computer Science, Interdisciplinary Applications Computer Science, Theory & Methods Engineering, Biomedical Medical Informatics Computer Science Engineering Medical Informatics Article MOTOR AREA PROPAGATION VALIDATION SIMULATION Transcranial focused ultrasound Acoustic simulation Single-element transducer