Kwak, Wonil Lee, Jeonkook Lee, Yong-Bok 2024-01-19T20:00:46Z 2024-01-19T20:00:46Z 2021-09-02 2019-06-01 0888-3270 https://pubs.kist.re.kr/handle/201004/119893 In previous studies on cryogenic ball bearings, a friction model of solid lubrication characteristics was employed with the assumption that the low dynamic viscosity of cryogenic fluids is negligible. A traction curve was then created using this dry friction model, with curve fitting being performed using a traction coefficient derived from the results of a ball-on-disk experiment with corresponding solid lubricant. However, the behavior prediction had many limitations, because the fluid characteristics in the cryogenic environment and the friction characteristics of the bearing components were not reflected. This study attempts to improve the reliability of cryogenic ball bearing dynamic analysis by proposing a hydrodynamic friction model considering the hydrodynamic effect of cryogenic fluids. A ball-on-disk experiment is conducted by simulating (1) ball-cage friction, (2) ball-inner/outer race friction, and (3) cage-inner/outer race friction characteristics. Hence, it is found that uncertainty factors causing traction coefficient fluctuation exist in certain device sections, reflecting the effect on the wear surface of friction and the hydrodynamic effect of the shear stress of the cryogenic fluid (liquid nitrogen). A dynamic experiment and cryogenic ball bearing analysis using the model considering the hydrodynamic effect are conducted and compared. From the ball bearing dynamic behavior analysis, the hydrodynamic friction model is found to predict a bearing friction coefficient that is closer to the actual value than the dry friction model. When the proposed model is applied to bearing dynamic behavior, it is possible to predict the cryogenic-bearing friction coefficient with 50% higher accuracy than the existing method. (C) 2019 Elsevier Ltd. All rights reserved. English ACADEMIC PRESS LTD- ELSEVIER SCIENCE LTD PREDICTION BEHAVIOR PTFE Theoretical and experimental approach to ball bearing frictional characteristics compared with cryogenic friction model and dry friction model Article 10.1016/j.ymssp.2019.01.056 1 MECHANICAL SYSTEMS AND SIGNAL PROCESSING, v.124, pp.424 - 438 MECHANICAL SYSTEMS AND SIGNAL PROCESSING 124 424 438 scie scopus 000461538500023 2-s2.0-85061194589 Engineering, Mechanical Engineering Article PREDICTION BEHAVIOR PTFE Cryogenic fluid Solid lubrication Friction model Traction coefficient Hydrodynamic effect