Lee, Tae-Gon Cho, Sung-Hoon Kim, Dae-Hyeon Hwang, Hyun-Gyu Lee, Ku-Tak Hong, Chang-Hyo Hong, Youn-Woo Chae, Keun Hwa Choi, Ji-Won Kim, Jeong-Seog Nahm, Sahn 2024-01-19T20:30:43Z 2024-01-19T20:30:43Z 2021-09-02 2019-04 0955-2219 https://pubs.kist.re.kr/handle/201004/120141 CuO-added (1-y)(Na0.5K0.5)(Nb1-xSbx)-yCaTiO(3) ceramics with 0.0 <= x <= 0.1 and 0.04 <= y <= 0.055 were sintered at 970 degrees C. Various cubic-based polymorphic-phase-boundary (PPB) structures were formed: orthorhombic-tetragonal-cubic, and tetragonal-cubic PPB structures. The crystal structure of the specimens near Curie temperature is a mixture of Pm3m cubic and P4mm tetragonal structures and these ceramics showed ferroelectric properties. A schematic phase diagram of these ceramics has been suggested. The piezoelectric properties of these specimens were influenced by their crystal structure. All the specimens are expected to have good fatigue properties. In particular, the specimen with a tetragonal-cubic PPB structure (x = 0.04 and y = 0.045) has a large d(33) of 338 pC/N and a high strain of 0.17% at 4.5 kV/mm. This specimen has good temperature stability; a d(33) value of 300 pC/N and strain of approximately 0.12% were obtained at 175 degrees C, indicating that this specimen is a good candidate for use as a piezoelectric multilayer actuator. English ELSEVIER SCI LTD POTASSIUM-SODIUM NIOBATE ELECTRICAL-PROPERTIES SINTERING TEMPERATURE ANTIMONY Various cubic-based polymorphic phase boundary structures in (1-y)(Na0.5K0.5)(Nb1-xSbx)-yCaTiO(3) ceramics and their piezoelectric properties Article 10.1016/j.jeurceramsoc.2018.12.025 1 JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, v.39, no.4, pp.973 - 985 JOURNAL OF THE EUROPEAN CERAMIC SOCIETY 39 4 973 985 scie scopus 000457819600035 2-s2.0-85058380881 Materials Science, Ceramics Materials Science Article POTASSIUM-SODIUM NIOBATE ELECTRICAL-PROPERTIES SINTERING TEMPERATURE ANTIMONY (Na,K)(Nb,Sb)-CaTiO3 piezoelectric ceramics Cubic-based polymorphic phase boundary structure Electric-field-induced strain Temperature stability of the piezoelectric properties