Singh, Bhupendra Devi, Nitika Mathur, Lakshya Singh, Rajesh K. Bhardwaj, Aman Song, Sun-Ju Henkensmeier, Dirk 2024-01-19T23:02:40Z 2024-01-19T23:02:40Z 2021-09-03 2018-04 0272-8842 https://pubs.kist.re.kr/handle/201004/121527 In the present work, we report a method of fabrication of dense 10 mol% Mg2+-doped cerium pyrophosphate phosphate (Ce0.9Mg0.5P2O7-PmOn; CMP-P) composites by microwave heat-treatment of the preformed Ce0.9Mg0.1P2O7 substrates in the presence of phosphoric acid. The composite was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS). The microwave heating at 375 degrees C for 5 min resulted in the formation of dense CMP-P composites which retained most of the pyrophosphate phase. The electrical conductivity was extracted from the EIS data and for the CMP-P composite prepared by H3PO4 loading for 10 h and microwave heat-treatment for 5 min it was found to be > 10(-2) S m(-1) in 100-250 degrees C range with a maximum of 0.062 S cm(-1) at 190 degrees C, which was significant for its application as electrolyte in intermediate temperature fuel cells. English ELSEVIER SCI LTD Fabrication of dense Ce0.9Mg0.1P2O7-PmOn composites by microwave heating for application as electrolyte in intermediate-temperature fuel cells Article 10.1016/j.ceramint.2017.12.252 1 CERAMICS INTERNATIONAL, v.44, no.6, pp.6170 - 6175 CERAMICS INTERNATIONAL 44 6 6170 6175 N scie scopus 000427215100048 2-s2.0-85039896957 Materials Science, Ceramics Materials Science Article PROTON-CONDUCTING ELECTROLYTES CERIUM PYROPHOSPHATE IONIC-CONDUCTIVITY ELECTRICAL-CONDUCTIVITY CEP2O7 ELECTROLYTE MEMBRANES STABILITY BEHAVIOR Cerium pyrophosphate-phosphate composites Microwave heating Proton conducting electrolytes Fuel cells