Park, Daeil Lee, Changwook Moon, Dong Ju Kim, Taegyu 2024-01-20T06:03:37Z 2024-01-20T06:03:37Z 2021-09-05 2015-09-21 0360-3199 https://pubs.kist.re.kr/handle/201004/125004 Design and thermal-fluidic analysis of CH4 steam-CO2 reforming (SCR) reactor for gas to liquid-floating production storage and offloading (GTL-FPSO) is presented in this paper. The temperature distribution through the SCR reactor should be uniform in order to optimize the catalytic reforming reaction. The numerical analysis of heat, flow and catalytic reactions was used to design the SCR reactor. The kinetic constants for catalytic analysis were calculated from Arrhenius plot that was obtained by SCR experiments on Ni/Al2O3 pellet catalysts. The catalysts were prepared by impregnating Ni into commercial Al2O3 pellets. The reaction temperatures ranged from 1023 K to 1173 K. The CH4 and CO2 conversions increased with the temperature, while H-2/CO ratio of syngas decreased with the increase of temperature. And the metallic foam catalyst showed a higher CH4 conversion than a pellet catalyst. The commercial FLUENT code was used to predict the temperature distribution in the SCR reactor. It was shown that the performance of SCR reactor depends strongly on the temperature distribution through the catalysts. Copyright (C) 2015, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved. English PERGAMON-ELSEVIER SCIENCE LTD METALLIC FOAM CATALYST SYNTHESIS GAS PARTIAL OXIDATION FPSO PROCESS METHANE DEPOSITION Design, analysis, and performance evaluation of steam-CO2 reforming reactor for syngas production in GTL process Article 10.1016/j.ijhydene.2015.05.030 1 INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.40, no.35, pp.11785 - 11790 INTERNATIONAL JOURNAL OF HYDROGEN ENERGY 40 35 11785 11790 scie scopus 000361404500059 2-s2.0-84956591565 Chemistry, Physical Electrochemistry Energy & Fuels Chemistry Electrochemistry Energy & Fuels Article; Proceedings Paper METALLIC FOAM CATALYST SYNTHESIS GAS PARTIAL OXIDATION FPSO PROCESS METHANE DEPOSITION Steam-CO2 reforming Supported catalyst Thermal-fluidic analysis Hydrogen GTL-FPSO