Kang, Hyun-Su Doh, Jung-Mann Yoon, Jin-Kook Lee, Seok-Jae Shon, In-Jin 2024-01-20T09:30:20Z 2024-01-20T09:30:20Z 2021-09-04 2014-08 1229-9162 https://pubs.kist.re.kr/handle/201004/126558 Nanocrystalline materials have received much attention as advanced engineering materials with improved physical and mechanical properties. As nanomaterials possess high strength, high hardness, excellent ductility and toughness, undoubtedly, more attention has been paid to the application of nanomaterials. Nanopowders of Al2O3, TiO2 and MgO were fabricated by high energy ball milling. The simultaneous synthesis and sintering of nanostuctured MgAl2Ti3O10-Mg0.6Al0.8Ti1.6O5 composite from milled powders of 1.4Al(2)O(3), 4.6TiO(2) and 1.6MgO was investigated by the high-frequency induction heated sintering process. A highly dense nanostructured MgAl2Ti3O10-Mg0.6Al0.8Ti1.6O5 composite was produced with the simultaneous application of 80 MPa pressure and an induced current within one minute. The grain sizes and mechanical properties (hardness and fracture toughness) of MgAl2Ti3O10-Mg0.6Al0.8Ti1.6O5 composite sintered at 1100 degrees C were investigated. English KOREAN ASSOC CRYSTAL GROWTH, INC CORDIERITE GLASS-CERAMICS FABRICATION COMPOUND Simultaneously rapid synthesis and consolidation of nanostructured MgAl2Ti3O10-Mg0.6Al0.8Ti1.6O5 composite and its mechanical properties Article 1 JOURNAL OF CERAMIC PROCESSING RESEARCH, v.15, no.4, pp.246 - 250 JOURNAL OF CERAMIC PROCESSING RESEARCH 15 4 246 250 scie scopus kci 000346116800009 2-s2.0-84916198265 Materials Science, Ceramics Materials Science Article CORDIERITE GLASS-CERAMICS FABRICATION COMPOUND Synthesis Sintering Composite Nanostructured material Powder metallurgy