Park, G. H. Hong, S. H. Kim, J. T. Park, H. J. Seo, Y. Suh, J. Y. Hong, S. Park, J. M. Kim, K. B. 2024-01-20T09:33:15Z 2024-01-20T09:33:15Z 2021-09-05 2014-06-01 0022-3093 https://pubs.kist.re.kr/handle/201004/126701 Phase transformation behavior of the quasicrystalline icosahedral phase (I-phase) and mechanical properties in a Ti41.5Zr41.5Ni17, alloy have been investigated using suction-casted bulk samples with various sample sizes (phi = 2, 3 and 5 mm). For 2 and 3 mm diameter rod samples, micrometer size dendritic beta-(Ti,Zr) phases are precipitated in the matrix and continuously I-phases are developed in the vicinity of the primary beta-(Ti,Zr) phases. With further increase of the sample size (i.e. decrease of cooling rate; phi = 5 mm), the length scale and volume fraction of primary beta-(Ti,Zr) dendritic phase are continuously increased and the constitution of matrix phase is changed from I-phase to eutectic lamella composed of bcc beta-(Ti,Zr) and hcp C14 Laves phases. The characterization of mechanical properties was carried out by compression and microhardness tests at room temperature. Depending on the selection, size and volume fraction of constituent phases, the values of hardness and compressive fracture strength are varied. The fracture surface morphologies of failed samples exhibit cleavage and quasi-cleavage patterns revealing the typical brittle failure characteristics. (C) 2014 Elsevier B.V. All rights reserved. English ELSEVIER SCIENCE BV BULK METALLIC GLASSES ZR-NI ALLOYS ZN-Y ALLOYS ICOSAHEDRAL-PHASE MATRIX COMPOSITES AMORPHOUS-ALLOYS HIGH-STRENGTH COOLING RATE SYSTEM PLASTICITY Phase transformation and mechanical properties of as-cast Ti41.5Zr41.5Ni17 quasicrystalline composites Article 10.1016/j.jnoncrysol.2014.03.024 1 JOURNAL OF NON-CRYSTALLINE SOLIDS, v.392, pp.6 - 10 JOURNAL OF NON-CRYSTALLINE SOLIDS 392 6 10 scie scopus 000336876700002 2-s2.0-84898624869 Materials Science, Ceramics Materials Science, Multidisciplinary Materials Science Article BULK METALLIC GLASSES ZR-NI ALLOYS ZN-Y ALLOYS ICOSAHEDRAL-PHASE MATRIX COMPOSITES AMORPHOUS-ALLOYS HIGH-STRENGTH COOLING RATE SYSTEM PLASTICITY Cooling rate Quasicrystalline icosahedral phase Ti-Zr-Ni alloy Cleavage fracture