Kim, J. H. Jurng, J. S. Bae, G. -N. Jeon, J. -K. Jung, K. Y. Kim, S. -C. Yim, J. -H. Park, Y. -K. 2024-01-20T10:01:40Z 2024-01-20T10:01:40Z 2021-09-04 2014-04-18 1556-7036 https://pubs.kist.re.kr/handle/201004/126873 MnOx nanoparticles were synthesized by spray pyrolysis, with and without citric acid assistance. The prepared MnOx particles were calcined between 600 and 1000 degrees C and characterized by Brunauer-Emmett-Teller, X-ray diffraction, scanning electron microscopy, and temperature-programmed reduction. The use of citric acid made it possible to reduce the particle size and increase the surface area of the MnOx particles. The highest surface area and reduction activity were achieved with citric acid. As a result, the MnOx nanoparticles prepared with citric acid and calcined at 600 degrees C showed the highest catalytic activity for the oxidation of benzene using ozone. English TAYLOR & FRANCIS INC SUPPORTED MANGANESE OXIDES ACETONE OXIDATION CATALYTIC-OXIDATION BEHAVIOR Benzene Oxidation with Ozone at Low Temperature Over an MnOx Nanoparticle Synthesized by Spray Pyrolysis Article 10.1080/15567036.2010.547923 1 ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, v.36, no.8, pp.866 - 873 ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS 36 8 866 873 scie scopus 000331601300008 2-s2.0-84894593664 Energy & Fuels Engineering, Chemical Environmental Sciences Energy & Fuels Engineering Environmental Sciences & Ecology Article SUPPORTED MANGANESE OXIDES ACETONE OXIDATION CATALYTIC-OXIDATION BEHAVIOR benzene spray pyrolysis MnOx catalytic oxidation ozone citric acid