Jin, Hwa-Young Kim, Jae-Yup Lee, Jin Ah Lee, Kwangsoo Yoo, Kicheon Lee, Doh-Kwon Kim, BongSoo Kim, Jin Young Kim, Honggon Son, Hae Jung Kim, Jihyun Lim, Jung Ah Ko, Min Jae 2024-01-20T10:01:53Z 2024-01-20T10:01:53Z 2021-09-05 2014-04-07 0003-6951 https://pubs.kist.re.kr/handle/201004/126884 Intense pulsed white light (IPWL) sintering was carried out at room temperature, which is suitable dye-sensitized solar cells (DSSCs) fabrication process on plastic substrates for the mass production. Five seconds irradiation of IPWL on TiO2 electrode significantly improves the photocurrent density and power conversion efficiency of DSSCs by more than 110% and 115%, respectively, compared to the DSSCs without IPWL treatment. These improvements were mainly attributed to the enhanced interconnection between the TiO2 nanoparticles induced by IPWL illumination, which is confirmed by the impedance spectra analysis. (C) 2014 AIP Publishing LLC. English AMER INST PHYSICS LOW-TEMPERATURE FABRICATION TO-ROLL PROCESS HYDROTHERMAL CRYSTALLIZATION ELECTRON-TRANSPORT EFFICIENCY FILMS FLASH NANOPARTICLES LAYERS RECOMBINATION Rapid sintering of TiO2 photoelectrodes using intense pulsed white light for flexible dye-sensitized solar cells Article 10.1063/1.4871370 1 APPLIED PHYSICS LETTERS, v.104, no.14 APPLIED PHYSICS LETTERS 104 14 scie scopus 000334849200083 2-s2.0-84899005395 Physics, Applied Physics Article LOW-TEMPERATURE FABRICATION TO-ROLL PROCESS HYDROTHERMAL CRYSTALLIZATION ELECTRON-TRANSPORT EFFICIENCY FILMS FLASH NANOPARTICLES LAYERS RECOMBINATION dye-sensitized intense pulsed white light solar cells TiO2 Photoelectrode