Choi, S. H. Kim, S. W. Hwang, C. S. Lee, M. H. 2024-01-20T10:03:22Z 2024-01-20T10:03:22Z 2021-09-04 2014-04 1615-6846 https://pubs.kist.re.kr/handle/201004/126961 We report a freestanding micro solid oxide fuel cell with both the anode and cathode deposited using electrostatic spray deposition (ESD) technique. The cell is consisted of dense yittria-stabilized zirconia (YSZ) electrolyte (100nm thick), porous lanthanum strontium manganite (LSM)-YSZ cathode (approximate to 3m thick), and porous NiO-YSZ anode (approximate to 3m thick). LSM-YSZ and NiO-YSZ composite powders were initially prepared by glycine nitrate process and super-critical fluid processes, respectively, and both cathode and anode layers were deposited by the ESD. The resulting freestanding micro cell exhibited an open circuit voltage close to the theoretical value of 1.09V, and a maximum power density of 41.3mWcm(-2) at 640 degrees C. English WILEY-V C H VERLAG GMBH OXIDE FUEL-CELLS YTTRIA-STABILIZED-ZIRCONIA ATOMIC LAYER DEPOSITION NANOSTRUCTURED MEMBRANES PERFORMANCE ANODE FABRICATION OPERATION STRESS FILMS Freestanding Micro-SOFCs with Electrodes Prepared by Electrostatic Spray Deposition Article 10.1002/fuce.201300251 1 FUEL CELLS, v.14, no.2, pp.332 - 335 FUEL CELLS 14 2 332 335 scie scopus 000334047200022 2-s2.0-84898476400 Electrochemistry Energy & Fuels Electrochemistry Energy & Fuels Article OXIDE FUEL-CELLS YTTRIA-STABILIZED-ZIRCONIA ATOMIC LAYER DEPOSITION NANOSTRUCTURED MEMBRANES PERFORMANCE ANODE FABRICATION OPERATION STRESS FILMS Electrostatic Spray Deposition Intermediate Temperature SOFC LSM Micro SOFC Oxygen Reduction Reaction