Yoo, So-Yeon Ha, Jong-Yoon Yoon, Seok-Jin Choi, Ji-Won 2024-01-20T11:33:29Z 2024-01-20T11:33:29Z 2021-09-05 2013-09 0955-2219 https://pubs.kist.re.kr/handle/201004/127707 0.05Pb(Mn1/3Sb2/3)O-3-0.05Pb(Al1/2Nb1/2)O-3-0.9Pb(Zr0.48Ti0.52)O-3 (PMS-PAN-PZT) high power piezoelectric system with both La2O3 as a hardener and CuO as a low sintering agent had been synthesized at 900 degrees C for 2 h. When La2O3 doping of the main composition went over 0.5 wt%, the mixed tetragonal and rhombohedral perovskite structure changed to pure rhombohedral perovskite structure. In case of the CuO, 1.0 and 1.5 wt% CuO content significantly improved the sinterability of the PMS-PAN-PZT system processed at 900 degrees C for 2 h. When La2O3 and CuO co-doped in PMS-PAN-PZT ceramics, piezoelectric constants (d(33)), quality factor (Q(m)), electromechanical coupling factor (k(p)) and dielectric constant (epsilon(T)(3)/epsilon(0)) of the piezoelectric ceramics sintered at 900 degrees C for 2h were optimized, such as 336 pC/N, 841, 60%, and 1358, respectively. New developed piezoelectric materials are promising for high power multilayer ceramic actuators. (C) 2013 Elsevier Ltd. All rights reserved. English ELSEVIER SCI LTD High-power properties of piezoelectric hard materials sintered at low temperature for multilayer ceramic actuators Article 10.1016/j.jeurceramsoc.2013.02.014 1 JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, v.33, no.10, pp.1769 - 1778 JOURNAL OF THE EUROPEAN CERAMIC SOCIETY 33 10 1769 1778 scie scopus 000319232700022 2-s2.0-84876722651 Materials Science, Ceramics Materials Science Article Low temperature sintering CuO La2O3 PMS-PAN-PZT Multilayer ceramic actuators