Lee, Dong Su Park, Yung Woo 2024-01-20T14:01:15Z 2024-01-20T14:01:15Z 2021-09-05 2012-10 1976-4251 https://pubs.kist.re.kr/handle/201004/128824 Dielectrophoretic filtering and alignment of single-walled carbon nanotubes (SWCNTs) were tested using deuterium oxide as a solvent. A solution of deuterium oxide-SWCNTs was dropped on top of a silicon chip and an ac electric field was applied between pre-defined electrodes. Deuterium oxide was found to be a better solvent than hydrogen oxide for the dielectrophoresis process with higher efficiency of filtering. This was demonstrated by comparing Raman spectra measured on the initial solution with those measured on the filtered solution. We found that the aligned nanotubes along the electric field were not deposited on the substrate but suspended in solution, forming chain-like structures along the field lines. This so-called pearl chain formation of CNTs was verified by electrical measurements through the aligned tubes. The solution was frozen in liquid nitrogen prior to the electrical measurements to maintain the chain formation. The current-voltage characteristics for the sample demonstrate the existence of conduction channels in the solution, which are associated with the SWCNT chain structures. English SPRINGER TRANSPORT MEASUREMENTS ELECTRICAL-TRANSPORT SEPARATION PHASE GAS Dielectrophoretic Alignment and Pearl Chain Formation of Single-Walled Carbon Nanotubes in Deuterium Oxide Solution Article 10.5714/CL.2012.13.4.248 2 CARBON LETTERS, v.13, no.4, pp.248 - 253 CARBON LETTERS 13 4 248 253 kci ART001706788 000209126000009 Chemistry, Multidisciplinary Materials Science, Multidisciplinary Chemistry Materials Science Article TRANSPORT MEASUREMENTS ELECTRICAL-TRANSPORT SEPARATION PHASE GAS carbon nanotubes dielectrophoresis dielectrophoretic filterings pearl chain formation