Hoang Anh Le Le Thuy Linh Chin, Sungmin Jurng, Jongsoo 2024-01-20T14:31:32Z 2024-01-20T14:31:32Z 2021-09-05 2012-07 0032-5910 https://pubs.kist.re.kr/handle/201004/129087 TiO2-anatase is obtained directly by chemical vapor condensation (T-95), or from a commercial catalyst (P-25). TiO2 nanoparticles and coconut shell activated carbon. CSAC, are mixed with mass ratios of 1/1 (CT-1, CF-1) and 2/1 (CT-2, CP-2), respectively. These nanomaterials are characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET) surface area, and X-ray photoelectron spectroscopy (XPS). The catalyst obtained from the CVC process is better than the commercial one in a comparison of the physico-chemical properties, and was also confirmed by the photocatalytic degradation of methylene blue (MB). The composited catalysts (CSAC/TiO2) are better than CSAC or naked TiO2 only. At the same TiO2 to CSAC mass ratio, the MB removal efficiencies followed the trend: CT-2>CT-1>CP-2>CP-1>T-95>CSAC>P-25. Furthermore, the advantages of the CT-2 catalyst revealed its practical potential to treat pollutants. (C) 2012 Elsevier B.V. All rights reserved. English ELSEVIER SCIENCE BV TIO2 NANOWIRE ARRAYS THERMAL-DECOMPOSITION TITANIUM-DIOXIDE ANATASE NANOPARTICLES SURFACE OPTIMIZATION FABRICATION HYDROLYSIS OXIDATION Photocatalytic degradation of methylene blue by a combination of TiO2-anatase and coconut shell activated carbon Article 10.1016/j.powtec.2012.04.004 1 POWDER TECHNOLOGY, v.225, pp.167 - 175 POWDER TECHNOLOGY 225 167 175 scie scopus 000305380400022 2-s2.0-84861186098 Engineering, Chemical Engineering Article TIO2 NANOWIRE ARRAYS THERMAL-DECOMPOSITION TITANIUM-DIOXIDE ANATASE NANOPARTICLES SURFACE OPTIMIZATION FABRICATION HYDROLYSIS OXIDATION Carbonized coconut TiO2 Chemical vapor condensation Photocatalytic degradation Methylene blue