Eom, KwangSup Cho, EunAe Kwon, HyukSang 2024-01-20T16:31:23Z 2024-01-20T16:31:23Z 2021-09-05 2011-09 0360-3199 https://pubs.kist.re.kr/handle/201004/130036 The feasibility of using the hydrolysis of Al alloys in an on-board hydrogen generation system for PEMFCs is investigated. Hydrogen produced by the hydrolysis of Al-Fe alloys is supplied directly to a PEMFC. The weight-normalized hydrogen generation rate of sheet Al-1Fe is higher than that of cubic Al-1Fe alloy, and its hydrogen generation rate changes little during hydrolysis in alkali water. Furthermore, during the hydrolysis reaction, the water temperature is stable. Hence, Al-1Fe in sheet form is suitable as a source for on-board hydrogen production from hydrolysis in alkali water. At a current of 10 A, the PEMFC presents a voltage of about 0.71 V, which remains stable for 37 min. However, after 37 min, the cell voltage decreases dramatically to 0 V due to a reduction in hydrogen feeding rate by exhaustion of Al-1Fe. It is particularly notable that on-board hydrogen production using the hydrolysis of Al-Fe alloy exhibits self-humidification, supplying humidity automatically without a humidifier. Copyright (C) 2011, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved. English PERGAMON-ELSEVIER SCIENCE LTD FUEL-CELL BOROHYDRIDE SOLUTION SODIUM-BOROHYDRIDE ALUMINUM-ALLOYS GENERATION KINETICS Feasibility of on-board hydrogen production from hydrolysis of Al-Fe alloy for PEMFCs Article 10.1016/j.ijhydene.2011.06.099 1 INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.36, no.19, pp.12338 - 12342 INTERNATIONAL JOURNAL OF HYDROGEN ENERGY 36 19 12338 12342 scie scopus 000295657300031 2-s2.0-80052805266 Chemistry, Physical Electrochemistry Energy & Fuels Chemistry Electrochemistry Energy & Fuels Article FUEL-CELL BOROHYDRIDE SOLUTION SODIUM-BOROHYDRIDE ALUMINUM-ALLOYS GENERATION KINETICS Hydrogen generation Hydrolysis On-board hydrogen production PEMFC Aluminum Al-Fe alloy