Sohn, Eun-Ho Kim, Byoung Gak Chung, Jae-Seung Kang, Hyo Lee, Jong-Chan 2024-01-20T17:33:23Z 2024-01-20T17:33:23Z 2021-09-02 2011-02-15 0021-9797 https://pubs.kist.re.kr/handle/201004/130639 Phase-separated surfaces of blends of polystyrene (PS) and well ordered comb-like polymer, poly[(oxy(decylsulfonylmethyl)ethylene)] (CH3-10SE), were prepared by spin casting polymer mixtures. Various surface morphologies, such as holes, islands, connected islands and pillars, were prepared by changing the blend compositions. Due to the influence of the CH3-10SE domain with a well ordered molecular conformation, a very low energy surface (approximate to 22 mN/m) was created, which is close to the value of the pure polymer (approximate to 20 mN/m), even when the blends contained only 20 wt.% of the pure polymer. Furthermore, by selective etching the PS domain in the blend surfaces, the advancing contact angles of water and n-hexadecane were highly increased from 113.5 degrees and 43.2 degrees for the pure CH3-10SE surface to 133.3 degrees and 67.2 degrees for the CH3-10SE structural surfaces with holes prepared using the solvent etching method, respectively. The result of the water advancing contact angles measured on the samples immersed in water over 20 days showed that the film stability of CH3-10SE could be improved considerably by even adding small amounts of PS. (C) 2010 Elsevier Inc. All rights reserved. English ACADEMIC PRESS INC ELSEVIER SCIENCE LIQUID-CRYSTALLINE POLYMERS POLYSTYRENE/POLY(METHYL METHACRYLATE) BLENDS CAST PS/PMMA BLENDS THIN-FILMS METHACRYLATE)-G-POLY(METHYL METHACRYLATE) SEGREGATION COPOLYMERS ADHESION ENERGY FORCE Wettability of the morphologically and compositionally varied surfaces prepared from blends of well ordered comb-like polymer and polystyrene Article 10.1016/j.jcis.2010.10.068 1 JOURNAL OF COLLOID AND INTERFACE SCIENCE, v.354, no.2, pp.650 - 661 JOURNAL OF COLLOID AND INTERFACE SCIENCE 354 2 650 661 scie scopus 000286157000031 2-s2.0-78650690054 Chemistry, Physical Chemistry Article LIQUID-CRYSTALLINE POLYMERS POLYSTYRENE/POLY(METHYL METHACRYLATE) BLENDS CAST PS/PMMA BLENDS THIN-FILMS METHACRYLATE)-G-POLY(METHYL METHACRYLATE) SEGREGATION COPOLYMERS ADHESION ENERGY FORCE Comb-like polymer Polystyrene Blend Surface morphology Wettability Film stability