Shon, In-Jin Lee, Dong-Mok Doh, Jung-Mann Yoon, Jin-Kook Ko, In-Yong 2024-01-20T17:35:02Z 2024-01-20T17:35:02Z 2021-09-02 2011-01-25 0921-5093 https://pubs.kist.re.kr/handle/201004/130719 A dense nanostructured MOSi2-SiC-Si3N4 composite was sintered by the high frequency induction heating method within 2 min from mechanically activated powder of MO2N, MO2C and Si. Highly dense MoSi2-SiC-Si3N4 composite was produced under simultaneous application of a 80 MPa pressure and the induced current. Mechanical properties and grain size of the composite were investigated. The average hardness and fracture toughness values obtained were 1420 kg/mm(2) and 4.5 MPa m(1/2), respectively. (C) 2010 Elsevier B.V. All rights reserved. English ELSEVIER SCIENCE SA OXIDATION BEHAVIOR FRACTURE-TOUGHNESS COMPOSITES COMBUSTION Consolidation and mechanical properties of nanostructured MoSi2-SiC-Si3N4 from mechanically activated powder by high frequency induction heated sintering Article 10.1016/j.msea.2010.10.063 1 MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.528, no.3, pp.1212 - 1215 MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 528 3 1212 1215 scie scopus 000286904300058 2-s2.0-78650175201 Nanoscience & Nanotechnology Materials Science, Multidisciplinary Metallurgy & Metallurgical Engineering Science & Technology - Other Topics Materials Science Metallurgy & Metallurgical Engineering Article OXIDATION BEHAVIOR FRACTURE-TOUGHNESS COMPOSITES COMBUSTION Ceramics Composites Sintering Nanostructured materials