Choi, Jae-Woo Lee, Seung-Yeon Park, Ki-Young Lee, Ki-Bong Kim, Dong-Ju Lee, Sang-Hyup 2024-01-20T18:01:37Z 2024-01-20T18:01:37Z 2021-09-02 2011-01 0011-9164 https://pubs.kist.re.kr/handle/201004/130789 This study assessed the phosphorous removal capacity of a mesostructure based on an inorganic material, titanium, in a batch experiment. The mesostructure and ion exchanges were confirmed by XRD and FT-IR, respectively. Equilibrium and kinetic studies were carried out to quantify the adsorption capacity and time dependent removal rate of phosphorous. Equilibrium data were analyzed using the Langmuir adsorption isotherm and found to be a good fit. As a result, it was found that the maximum adsorption capacity for phosphorous by the titanium mesostructure was 49.28 mg/g. Kinetic data followed a pseudo-first/second-order kinetic model. The initial phosphorous adsorption onto the titanium mesostructure was fast. Due to the low cost and high adsorption capability, the titanium mesostructure has the potential to be utilized for the cost-effective removal of phosphorous from wastewater. (C) 2010 Elsevier B.V. All rights reserved. English ELSEVIER SCIENCE BV Investigation of phosphorous removal from wastewater through ion exchange of mesostructure based on inorganic material Article 10.1016/j.desal.2010.08.015 1 DESALINATION, v.266, no.1-3, pp.281 - 285 DESALINATION 266 1-3 281 285 N scie scopus 000286017100039 2-s2.0-78649644671 Engineering, Chemical Water Resources Engineering Water Resources Article SURFACTANT MICELLE MESOSTRUCTURE ADSORPTIVE REMOVAL AQUEOUS-SOLUTIONS PHOSPHATE ADSORPTION MESOPOROUS MATERIALS ACTIVATED ALUMINA RECOVERY BIOFILM REACTOR PRECIPITATION Phosphorous Mesostructure Titanium Removal