Lee, Sangwook Cho, In-Sun Lee, Ji Hae Kim, Dong Hoe Kim, Dong Wook Kim, Jin Young Shin, Hyunho Lee, Jung-Kun Jung, Hyun Suk Park, Nam-Gyu Kim, Kyungkon Ko, Min Jae Hong, Kug Sun 2024-01-20T19:33:50Z 2024-01-20T19:33:50Z 2021-09-02 2010-03-23 0897-4756 https://pubs.kist.re.kr/handle/201004/131624 The performance of dye-sensitized solar cells (DSSCs) consisting of anatase TiO2 nanoparticles that were synthesized via a two-step sol-gel process was using electron transport and optical characterizations. Spherical nanoparticles with the average diameter of 20 nm, elongated nanorods with all aspect ratio (AR) of 5, and nanowires with AR = 10 were synthesized. The synthesized nanoparticles possess narrow size distribution, high crystallinity, and negligible surface defects and residual organics, which is very Suitable for achieving highly efficient photovoltaic devices. The effect of particle size distribution oil the performance of DSSC was characterized by comparing the synthesized TiO2 nanoparticles and commercial TiO2, nanoparticles (P25). In comparison with P25, the two-step Sol-gel-grown nanoparticles significantly improved the photovoltaic conversion efficiency by 32.5%, because of a larger specific surface area, higher electrolyte penetration ability, and lower optical reflectance. Therefore, the photoelectrode of the two-step sol-gel-derived TiO2 nanoparticles enhanced the adsorption of dye sensitizers (N719), promotes the transfer of photo-generated carriers, and decreases the ratio of reflected solar spectrum that is not harnessed. As a result, the energy conversion efficiency of DSSCs increased to 6.72% without the use Of a scattering layer and coadsorbants. We also investigated the effect of aspect ratio of TiO2, particles oil photovoltaic characteristic. Ail increase in the aspect ratio of the synthesized nanomaterials resulted in an increase in carrier lifetime. A decrease in the density of grain boundaries Suppresses the trapping of carriers and the subsequent recombination of electron-hole pairs. This Study demonstrates that the two-step sol-gel-derived nanomaterials provide a way to achieve appreciable efficiency of photoconversion devices. English AMER CHEMICAL SOC PHOTOCATALYTIC ACTIVITY CELLS FILMS NANOTUBES IMPEDANCE TRANSFORMATION RECOMBINATION PHOTOCURRENT ADSORPTION STABILITY Two-Step Sol-Gel Method-Based TiO2 Nanoparticles with Uniform Morphology and Size for Efficient Photo-Energy Conversion Devices Article 10.1021/cm902842k 1 CHEMISTRY OF MATERIALS, v.22, no.6, pp.1958 - 1965 CHEMISTRY OF MATERIALS 22 6 1958 1965 scie scopus 000275711500006 2-s2.0-77949547423 Chemistry, Physical Materials Science, Multidisciplinary Chemistry Materials Science Article PHOTOCATALYTIC ACTIVITY CELLS FILMS NANOTUBES IMPEDANCE TRANSFORMATION RECOMBINATION PHOTOCURRENT ADSORPTION STABILITY dye-sensitized sol-gel TiO2