Chung, Jae Dong Lee, Dae-Young 2024-01-20T21:06:24Z 2024-01-20T21:06:24Z 2021-09-03 2009-06 0140-7007 https://pubs.kist.re.kr/handle/201004/132433 Numerical simulation has been conducted for the desiccant wheel, which is the crucial component of a desiccant cooling system. As the key operating/design parameters, the rotation speed and the area ratio of regeneration to dehumidification have been examined for a range of regeneration temperature from 50 degrees C to 150 degrees C. Optimization of these parameters is conducted based on the wheel performance evaluated by means of Moisture Removal Capacity (MRC). Simulations are focused on the effect of desiccant isotherm on the optimal conditions of these operating/design parameters. Also the effects of the outdoor air temperature and humidity on the optimum design parameters are examined. (C) 2009 Elsevier Ltd and IIR. All rights reserved. English ELSEVIER SCI LTD MASS-TRANSFER DEHUMIDIFICATION HEAT SIMULATION Effect of desiccant isotherm on the performance of desiccant wheel Article 10.1016/j.ijrefrig.2009.01.003 1 INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, v.32, no.4, pp.720 - 726 INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID 32 4 720 726 scie scopus 000268059500016 2-s2.0-67349282736 Thermodynamics Engineering, Mechanical Thermodynamics Engineering Article; Proceedings Paper MASS-TRANSFER DEHUMIDIFICATION HEAT SIMULATION Air conditioning Modelling Desiccant wheel Simulation Mass transfer Optimization Variable speed