Park, Hui Joon Hong, Seung Min Lee, Sang-Soo Kim, Junkyung Park, Min 2024-01-20T23:30:54Z 2024-01-20T23:30:54Z 2021-09-03 2008-05 1521-3323 https://pubs.kist.re.kr/handle/201004/133521 A new type of composite filler mechanically treated with multi-walled carbon nanotubes (MWNTs) and BaTiO3 (BT) particles was prepared to produce higher dielectric properties in the composite. The hybrid film fabricated by incorporating these composite fillers in an epoxy matrix had a high dielectric constant and similar dielectric loss as compared to the composite which contained neat BT particles. The dielectric properties of these hybrid films were found to be dependent on both the content of MWNTs and mechanical processing time. Results suggest that this novel hybrid film composed of the composite filler and the epoxy matrix can be used for embedded capacitor material. English IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC Effects of CNT/BaTiO3 composite particles prepared by mechanical process on dielectric properties of epoxy hybrid films Article 10.1109/TADVP.2008.920348 1 IEEE TRANSACTIONS ON ADVANCED PACKAGING, v.31, no.2, pp.417 - 422 IEEE TRANSACTIONS ON ADVANCED PACKAGING 31 2 417 422 scie scopus 000258768300022 2-s2.0-44449097183 Engineering, Manufacturing Engineering, Electrical & Electronic Materials Science, Multidisciplinary Engineering Materials Science Article barium titanate composite filler dielectric property embedded capacitor epoxy hybrid film mechanical processing multiwalled carbon nanotubes (MWNTs)