Han, Jun-Hyun Suh, Jin-Yoo Jee, Kwang-Koo Lee, Jae-Chul 2024-01-20T23:33:16Z 2024-01-20T23:33:16Z 2021-09-03 2008-03-25 0921-5093 https://pubs.kist.re.kr/handle/201004/133636 The shear forming of 1050 aluminum alloys was conducted repeatedly via a shear deforming process termed dissimilar channel angular pressing (DCAP), in order to study the effect of the accumulative strain on the formability and planar anisotropy of aluminum alloy sheets. Very high plastic strains (epsilon(eff)similar to 19) were imparted to the alloys by repeated DCAP (N= 32). The finite element method (FEM) was used to analyze the deformation history during the DCAP. The corresponding texture evolution due to DCAP was simulated using the deformation history extracted from the FEM analysis. Experimental verification of the analytical results was also made. The r-value (Lankford parameter) was calculated from the measured textures using the rate sensitivity model. The effects of the texture evolution due to the multiple passages of DCAP on the formability and planar anisotropy were analyzed based on the measured (r) over bar- and Delta r-values. Herein, we report on the possible production of aluminum alloy sheets having good formability and low planar anisotropy by repeated DCAP. (c) 2007 Elsevier B.V. All rights reserved. English ELSEVIER SCIENCE SA CONFINED STRIP SHEARING PLASTIC ANISOTROPY GRAIN-REFINEMENT EVOLUTION SHEET DEFORMATION PREDICTION BEHAVIOR STRAIN Evaluation of formability and planar anisotropy based on textures in aluminum alloys processed by a shear deforming process Article 10.1016/j.msea.2007.04.117 1 MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.477, no.1-2, pp.107 - 120 MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING 477 1-2 107 120 scie scopus 000254780400017 2-s2.0-39349115018 Nanoscience & Nanotechnology Materials Science, Multidisciplinary Metallurgy & Metallurgical Engineering Science & Technology - Other Topics Materials Science Metallurgy & Metallurgical Engineering Article CONFINED STRIP SHEARING PLASTIC ANISOTROPY GRAIN-REFINEMENT EVOLUTION SHEET DEFORMATION PREDICTION BEHAVIOR STRAIN equal channel angular pressing dissimilar channel angular pressing finite element method texture formability planar anisotropy