Hong, C. H. Yoon, W. Y. Cho, B. W. Yi, K. Y. 2024-01-21T00:02:12Z 2024-01-21T00:02:12Z 2021-09-03 2008-01 1099-0062 https://pubs.kist.re.kr/handle/201004/133844 This paper reports the effect of the level of discharge on the morphological changes in lithium powder particles after discharge followed by a charge sequence. Each pouch cell contained a lithium powder electrode as a working electrode and a lithium foil electrode as a counter electrode. Various amounts of discharge (dissolution process) or charge (deposition process) were tested at a uniform current density of 0.1 mA cm(-2), and scanning electron microscope images were examined to explain the dissolution and deposition behavior for each condition. The maximum amount of discharge required to keep the initial shape of the particle was investigated. English ELECTROCHEMICAL SOC INC DENDRITIC GROWTH ELECTRODE CELLS ANODE Effect of the amount of discharge on the morphological changes of the lithium powders Article 10.1149/1.2836455 1 ELECTROCHEMICAL AND SOLID STATE LETTERS, v.11, no.4, pp.A39 - A41 ELECTROCHEMICAL AND SOLID STATE LETTERS 11 4 A39 A41 scie scopus 000253238000001 2-s2.0-39349116242 Electrochemistry Materials Science, Multidisciplinary Electrochemistry Materials Science Article DENDRITIC GROWTH ELECTRODE CELLS ANODE lithium powder morphological change amount of discharge dissolution deposition