Park, Hyun-Kuk Shon, In-Jin Yoon, Jin-Kook Hong, Kyung-Tae 2024-01-21T01:36:27Z 2024-01-21T01:36:27Z 2021-09-05 2006-12-21 0925-8388 https://pubs.kist.re.kr/handle/201004/134810 Dense nanostructured NbSi2-SiC composite was synthesized by high-frequency induction heated combustion synthesis (HFIHCS) method within 2 min in one step from powders of NbC and 3Si. Simultaneous combustion synthesis and densitication were accomplished under the combined effects of an induced current and mechanical pressure. Highly dense NbSi2-SiC with relative density of up to 99.8% were produced under simultaneous application of a 60 MPa pressure and the induced current. The average grain size and mechanical properties (hardness and fracture toughness) of the composite were investigated. (c) 2006 Elsevier B.V. All rights reserved. English ELSEVIER SCIENCE SA ONE-STEP SYNTHESIS CO HARD MATERIALS MECHANICAL-PROPERTIES FRACTURE-TOUGHNESS DENSIFICATION MOSI2 WSI2 WC Consolidation of nanostructured NbSi2-SiC composite synthesized by high-frequency induction heated combustion Article 10.1016/j.jallcom.2006.01.085 1 JOURNAL OF ALLOYS AND COMPOUNDS, v.426, no.1-2, pp.322 - 326 JOURNAL OF ALLOYS AND COMPOUNDS 426 1-2 322 326 scie scopus 000243085600058 2-s2.0-33750969994 Chemistry, Physical Materials Science, Multidisciplinary Metallurgy & Metallurgical Engineering Chemistry Materials Science Metallurgy & Metallurgical Engineering Article ONE-STEP SYNTHESIS CO HARD MATERIALS MECHANICAL-PROPERTIES FRACTURE-TOUGHNESS DENSIFICATION MOSI2 WSI2 WC high-frequency induction heated combustion composite materials intermetallic sintering nanofabrication mechanical properties