황요하 이상배 이인재 이종민 2024-01-21T02:03:59Z 2024-01-21T02:03:59Z 2021-09-06 2006-11 1598-2785 https://pubs.kist.re.kr/handle/201004/134975 Measurement of blade strain with sensors directly installed on the blade has one critical issue, how to send the sensor signal to the ground. Strain-gauges have been dominantly used to directly measure stress of a blade and either a slip ring or a telemetry system has to be used to send measured signal to the ground. However, both systems have many inherent problems and sometimes very severe limitations to be practically used. In this paper, new on-line strain monitoring method using FBG(Fiber Bragg Grating) sensors and a beam coupler is introduced. Measurement of rotor stress using FBG sensors is nothing new, but unlike other system which installs all necessary instruments on the rotor and use telemetry system to send data to the ground, this system makes use of light's unique characteristic - light travels through space. In this new approach, single optical fiber with many FBG sensors is installed on the blade and all other necessary instruments can be installed at ground thereby giving tremendous advantages over slip ring or telemetry system. A reference sensor is also introduced to compensate the beam coupler's transmission loss change due to rotation. The suggested system's good performance is demonstrated with experiments.攀†책임저자;정회원, 한국과학기술연구원 트라이볼로지연구센터E-mail : yoha@kist.re.krTEL : (02)958-5656, Fax:(02)958-5659*정회원, (주)신도리코 기술연구소 한국소음진동공학회 광섬유 격자 센서와 빔 커플러를 사용한 회전중인 블레이드의 변형률 측정 방법 On-line Strain Measurement of Rotating Blade Using Fiber Bragg Grating Sensors and Beam Coupler Article 2 한국소음진동공학회논문집, v.16, no.11, pp.1172 - 1178 한국소음진동공학회논문집 16 11 1172 1178 kci ART001097309 Fiber Bragg Grating Sensor(FBG sensor 광섬유 격자 센서) Beam Coupler(빔 커플러) Rotating Blade(회전하는 블레이드) Fiber Bragg Grating Sensor(FBG sensor 광섬유 격자 센서) Beam Coupler(빔 커플러) Rotating Blade(회전하는 블레이드)