Indarto, Antonius Choi, Jae-Wook Lee, Hwaung Song, Hyung Keun 2024-01-21T02:04:28Z 2024-01-21T02:04:28Z 2021-09-01 2006-11 1092-8758 https://pubs.kist.re.kr/handle/201004/134996 Decomposition of carbon dioxide (CO2) by gliding arc plasma was examined. The plasma device consisted of two or four triangular stainless steel plates. The gas enters through a nozzle tube from the upper part of the cylindrical reactor and exits at the bottom part of the reactor. Some additional gases, such as N-2, O-2, air, and H2O, have been used to study the dilution effects on CO2 conversion. A simple kinetic reaction model was developed to investigate the pathways of plasma reaction. Experimental results indicate that the conversion of pure CO2 reaches 18% at the total gas flow rate of 0.85 L/min and produces CO and O-2 as the final products. The effects of additional gases injection are described in detail in this paper. English MARY ANN LIEBERT, INC VIBRATIONAL-EXCITATION CARBON-DIOXIDE DECOMPOSITION DISCHARGE REDUCTION EMISSIONS METHANE GAS O-2 N2 Conversion of CO2 by gliding arc plasma Article 10.1089/ees.2006.23.1033 1 ENVIRONMENTAL ENGINEERING SCIENCE, v.23, no.6, pp.1033 - 1043 ENVIRONMENTAL ENGINEERING SCIENCE 23 6 1033 1043 scie scopus 000241927200016 2-s2.0-33750991084 Engineering, Environmental Environmental Sciences Engineering Environmental Sciences & Ecology Article VIBRATIONAL-EXCITATION CARBON-DIOXIDE DECOMPOSITION DISCHARGE REDUCTION EMISSIONS METHANE GAS O-2 N2 plasma gliding arc CO2 reaction kinetics conversion