Kim, CW Lee, MH Jeong, WT Lee, KS 2024-01-21T04:34:52Z 2024-01-21T04:34:52Z 2022-01-25 2005-08 0378-7753 https://pubs.kist.re.kr/handle/201004/136221 Olivine LiFePO4 has been produced using Fe2O3 raw material by mechanical alloying (MA) and subsequent firing. X-ray diffraction (XRD) and Mossbauer spectroscopy analysis revealed that LiFePO4 prepared by MA had a well-ordered olivine-type LiFePO4 Structure with an ionic state of Fe2+ by the reduction of Fe3+ precursor. It showed a maximum discharge capacity of 160 mAh g(-1) at C/20 (8.5 mA g(-1)) when cycled from 2.5 to 4.3 V. Compared to the LiFePO4 prepared by conventional solid-state method, MA synthesized LiFePO4 a displayed higher charge/discharge capacity and more stable cycle life because of the improvement of the electronic conductivity. It was originated from uniformly distributed fine particles and an increased specific surface area by MA process. (c) 2005 Elsevier B.V. All rights reserved. English ELSEVIER Synthesis of olivine LiFePO4 cathode materials by mechanical alloying using iron(III) raw material Article 10.1016/j.jpowsour.2005.03.058 1 JOURNAL OF POWER SOURCES, v.146, no.1-2, pp.534 - 538 JOURNAL OF POWER SOURCES 146 1-2 534 538 N scie scopus 000232756700107 2-s2.0-24944544724 Chemistry, Physical Electrochemistry Energy & Fuels Materials Science, Multidisciplinary Chemistry Electrochemistry Energy & Fuels Materials Science Article; Proceedings Paper PHOSPHO-OLIVINES LiFePO4 cathode material olivine-type iron phosphate mechanical alloying