Kim, JY Chung, IJ Kim, YC Kim, JK Yu, JW 2024-01-21T06:04:20Z 2024-01-21T06:04:20Z 2021-09-02 2004-12 1542-1406 https://pubs.kist.re.kr/handle/201004/137021 A solid-state solar cell was fabricated with acid-sensitized nanostructural tin oxide electrode and poly(oinylidene fluoride-co-hexafluropropylene)-based gel electrolyte. The effect of ionic conductivity on the device performance was investigated by varying the weight ratio of propylene carbonate acting as a plasticizer in the gel. polymer electrolyle (GPE). At a proper composition of GPE, a short circuit photocurrent density of 2.5 mA/cm(2), an open circuit photo-voltage of 0.28 V, and a fill factor of 0.51 were obtained under illumination of while Xe light with an intensity of 100 mW/cm(2). English TAYLOR & FRANCIS LTD SOLID-STATE DEVICES Dye sensitized solar cell with P(VdF-co-HFP) gel electrolyte Article 10.1080/15421400490506243 1 MOLECULAR CRYSTALS AND LIQUID CRYSTALS, v.424, pp.241 - + MOLECULAR CRYSTALS AND LIQUID CRYSTALS 424 241 + scie scopus 000226415900031 2-s2.0-24644447780 Chemistry, Multidisciplinary Crystallography Materials Science, Multidisciplinary Chemistry Crystallography Materials Science Article; Proceedings Paper SOLID-STATE DEVICES perylene acid polymer electrolyte solar cell